Advertisement
Functions
-
Connect the computer with the network
-
Act as a repeater in the network
Specifications
Power supply
Battery
Power consumption
Low battery indication
Installation
Number of users
Communication
Address length
USB
Operating temperature range
R-138z Networking device
AC adapter 5V DC
LC 18650 3.7V Lithium battery
Max 100mA
3.4V – acknowledge, 3.2V – power off
Wall-hanging
Max 3 users
433.92MHz, FSK, 57.6K bit rate
16 bit
USB 1.0
0 – 60 ℃
24/4/2012
Advertisement
Table of Contents
Summary of Contents for Eastern Times Technology R-138z
- Page 1 24/4/2012 R-138z Networking device Functions Connect the computer with the network Act as a repeater in the network Specifications Power supply AC adapter 5V DC Battery LC 18650 3.7V Lithium battery Power consumption Max 100mA Low battery indication 3.4V – acknowledge, 3.2V – power off...
- Page 2 Network Status Power Network Test 1. Connect the computer with the network - Connecting R-138z to a computer does not require external power. - Install the PL-2303 USB driver, downloadable on http://www.prolific.com.tw/eng/downloads.asp?ID=31 - When using the Wetness Care system, select the appropriate COM port.
- Page 3 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the R-138z and is the answer not in the manual?
Questions and answers