Chandler And Me The Candle Maker +PLUS Instruction Manual

The Candle Maker +PLUS
Instruction Manual
Thank you for purchasing The Candle Maker by
Chandler & Me. Please read this manual carefully
to ensure safe and proper use and enjoyment.
Instructions for using your Candle Maker with the
32oz pitcher (supplied) in Small Batch Mode
Place the unit on a flat, even surface such as a
kitchen counter and plug it in. To turn the unit on
simply place the pitcher onto the heating element,
all lights will flash briefly and a short beep will be
heard. Buttons 1, 2, 3 will start flashing and the
machine is now ready for use.
1. Pour your pre-measured amount of
soy wax (up to 1 lb) into the pitcher and
press button
process
2. When button
pre-measured fragrance into the
pitcher and press this button to start the
stirring process
3. When button
the pitcher and pour the wax carefully
into your candle jar
Before you pour: Prepare your jar by sticking the
wick firmly to the base being careful to ensure it is
centered. Use a wick holder to
help support your wick in the
centre, as per the diagram.
Pouring: Pour the melted wax
slowly but surely into the jar,
being careful to avoid the
wooden wick holder.
For the best results let your candle cool slowly
in an area of the house with a relatively stable
temperature.
Tip: If you have a marble or stone benchtop, place
the candle on a wooden board or towel and try
not to disturb the jar while the wax is setting.
to start the melting
is flashing pour your
lights up it is time to lift
2
4
5
Components
1. Stirrer attachment
2. Pitcher (32 oz)
3. Cradle
Changing the mode. The Candle Maker + has
three pre-set modes that provide greater flexibility
for batch size and higher heat and manual
controls.
Small Batch Mode
Best for: making 1 to 2 medium size soy
candles at a time using the standard pitcher
up to 16 fl oz.
Press button
Large Batch Mode
Best for: making 4 - 5 medium size soy
candles at a time using the large pitcher up
to 32 fl oz. Tip! Always feed the wax flakes in
as it melts to avoid overloading the stirrer.
Press button
High Heat Mode
Best for: melting of beeswax to 179F. Can
be used with both the standard and large
pitchers.
Press button
which will melt your wax to around 179F.
You can then remove the melted wax or
continue the stirring phase.
Variable control mode. You can manually control
the phases of the unit to experiment with different
waxes and recipe's. Press button
variable control mode and while in this mode you
can press button at any time to fast forward
and button to rewind.
1
3
4. Heating Element
5. Control Panel
to start.
to start large batch mode.
to start high heat mode
to enter