Table of Contents
Advertisement
en Troubleshooting
Fault
lights up.
flashes.
"E:30/-20"
All other error codes.
The appliance is not
working.
The programme does
not start.
42
Cause and troubleshooting
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 32
▶
Water level is too high.
Select a suitable programme for draining.
▶
→ "Programmes", Page 25
Door is not closed.
Close the door.
▶
Laundry is caught in the door.
Remove any trapped laundry.
▶
Detergent dosage is too high.
Reduce the amount of detergent for the next wash-
▶
ing cycle with the same load.
Additional water is added.
Do not add any extra water to the appliance while it
▶
is operating.
Solenoid valve defective.
Call the after-sales service.
▶
→ "Customer Service", Page 50
Malfunction
Call the after-sales service.
▶
→ "Customer Service", Page 50
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
You have not pressed
Press
Inicio/Pausa + Carga.
▶
Door is not closed.
Close the door.
▶
Childproof lock is activated.
Deactivate childproof lock.
▶
→ "Deactivating the childproof lock", Page 33
Termin. is activated.
Check whether
▶
→ "Buttons", Page 23
Inicio/Pausa + Carga.
Termin. is activated.
Advertisement
Table of Contents
