Using The Ps Utility - Airlink101 APSUSB211 User Manual

8. Using the PS Utility

PS Utility is a user-friendly program that allows you to configure some basic functions
of the Print Server such as performing a factory reset or updating the firmware. To
access the complete management features of the Print Server, you'll need to use the
Web Configuration Utility, which is described in the next section.
Note: If you haven't installed PS Utility yet, please follow the installation instructions as
described in Section 3, Installing PS Utility.
You can start PS Utility by going to Start, (All) Programs, PS-Utility, PS-Utility v3.00.
Device Name: Lists any Print Server that is connected on your network.
Discover Device: Click on this button to automatically search for any Print Server that
is connected to your network.
Setup Wizard: Click on this button to run the setup wizard for the Print Server.
Change IP Address: Click on this button to change the IP Address and other TCP/IP
settings for the Print Server.
Show Web Setup: Click on this button to display the Web Configuration Utility.
Update Firmware: Click on this button to update the Print Server's firmware.
Note: You must download the updated firmware from
Factory Reset: Click on this button to reset the Print Server back to factory settings.
Print Test: Click on this button to perform a print test.
About: Click on this button to display the version number of the PS Utility.
Close: Click on this button to close PS Utility.
www.airlink101.com
15
first.