Gigabyte R183-Z93-AAD1 User Manual page 129

Parameter
RCC_DEV0
(continued)
Description
P2PEgress ACS Control
Š
– Options available: Auto, Disabled, Enabled. Default setting is Auto.
P2pReqStrap5
Š
– Options available: Auto, Disabled, Enabled. Default setting is Auto.
E2E_PREFIX
Š
– Options available: Auto, Disabled, Enabled. Default setting is Auto.
EXTENDED_FMT
Š
– Options available: Auto, Disabled, Enabled. Default setting is Auto.
AtomicRoutingStrap5
Š
– Options available: Auto, Disabled, Enabled. Default setting is Auto.
BIOS Setup
- 129 -