Specifications - Nakamichi CR-2 Owner's Manual

Specifications
Track Configuration .. 4 tracks/2-channel stereo
Heads .......... ... 2 (erase head x 1, record/playback head x 1)
MOUQIS: secicicsssicessicasks ivieay ice DC servo motor (capstan drive) x 1
DC motor (ree! drive x 1, cam drive x 1)
Power SOUICE «00... eee 120, 220, 240 or 110/127/220/240 V AC, 50/60 Hz
: ¢ (According to to pou of sale)
Power Consumption ...........
CR-1: 25 W fhe
Tape Speed oo... cece 1-7/8 ips. (4.8 cm/sec.) +0.5%
Wow-and-Flutter ................ Less than 0.11% WTD Peak
Less than 0.06% WTD RMS
Frequency Response .......... 20 Hz—20,000 Hz +3 dB
(recording level —20 dB, ZX[Type IV], SX[Type Il},
EXIl [Type |} tape)
Signal-to-Noise Ratio .......... Dolby C-Type NR on <70 us, ZX{Type IV drake
Better than 70 dB (400 Hz, 3% THD, IHF D RMS)
Dolby B-Type NR on <70 BS, 2X{Type IV] tape >
Better than 64 dB (400 Hz, 3% THD, IHF A-WTD RMS)
Total Harmonic Distortion . . . Less than 1.0% (400 Hz, 0 dB, ZX{Type IV}, SX[Type iN,
" Exil{Type I] tape)
Erasure . Better than 60 dB (100 Hz, +10 dB)
Separatiot . Better than 36 dB (1 kHz, 0dB )
Crosstalk . . Better than 60 dB (1 kHz, 0 dB)
Bias Frequ . 105 kHz :
Input (Line) .... . 50 mv/30k chms
Output (Line) 00... res (400 Hz, 0 dB) (CR-2: Output level contro! at max.)
ohms
(Headphones) ................. CR-2: 2.2 mW into 8 ohms
(400 Hz, 0 dB, output level control at max.)
CR-1: 1.2 mW into 8 ohms (400 Hz, 0 dB
Fast-Wind Time ................. Approx. 80 seconds (with C-60 come)
Dimensions ..............0.06 430 (W) x 100 (H) x 265 (D) m
16-15/16 (W) x 3-15/16 (H) x 10. 7/16 (D) inches
Approximate Weight ........... 5.4 kg, 11 Ibs. 14 0z
Specifications and design are subject to change for further improvement without notice.
¢ Noise Reduction System manufactured under license from Dolby Laboratories Licensing
Corporation.
¢ The word ''DOLBY'' and the Double-D-Symbol are trademarks of Dolby Laboratories Licensing
Corporation.