Download Print this page

Advertisement

Quick Links

E105 USER MANUAL
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Launch mode
 Turn the TX/RX switch to the TX,Launch mode will be entered at this time.
 Presss the power button and hold it for 2 seconds to start,it will enter Bluetooth
search status when power button red and blue lights alternate flash quickly,the
power button turns blue and constantly on and then flashes slowly when one
device is connected,bluetooth will automatically search and pair the next
device ,the power button turns the blue light to the red light and then turns purple
and constantly on when the second device is connected (turn the product off after
connected the device, you just press the power button to restart and the
bluetooth will automatically connects the paired devices)
 Turn the SPDIF/AUX switch to the AUX, input the audio source signal from AUX
headphone jack,then the two paired Bluetooth devices will play the audio input
fromAUX headphone jack at the same time.
 Turn the SPDIF/AUX switch to the SPDIF,when fiber optic signals are input from
SPDIF TX interface,the two paired bluetoothdevices can simultaneously play
audio input from SPDIF TX interface.
 You can press the power button for 5seconds to shutdown at any state。
 

Advertisement

loading

Summary of Contents for Eastern Times Technology E105

  • Page 1 E105 USER MANUAL                                      Launch mode    Turn the TX/RX switch to the TX,Launch mode will be entered at this time.  Presss the power button and hold it for 2 seconds to start,it will enter Bluetooth...
  • Page 2  Receive mode :   Turn the TX/RX switch to the RX and receive mode will be entered  Press the power button for 1 second to start,it will enter Bluetooth search status whenpower button red and blue lights altmate flash quickly,After the bluetooth is paired with "zf-380", the power button will turn to blue light to keep it on。...
  • Page 3 FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.