Advertisement
2 TONNES
JACK
STAND
Safe working load
of 2 tonne per
pair - must be
used in pair.
3 TONNES
JACK
STAND
Safe working load
of 3 tonne per
pair - must be
used in pair.
6 TONNES
JACK
STAND
Safe working load
of 6 tonne per
pair - must be
used in pair.
TH52002C / TH53003E/ TH56002A
Original Instructions
IM-TH52002C-EN / IM-TH53003E-EN / IM-TH56002A-EN
Iss: 05/2023
JACK STAND
INSTRUCTION & USER MANUAL
EN
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for jcb TH52002C
Summary of Contents for jcb TH52002C
- Page 1 3 tonne per pair - must be used in pair. 6 TONNES JACK STAND Safe working load of 6 tonne per pair - must be used in pair. TH52002C / TH53003E/ TH56002A Original Instructions IM-TH52002C-EN / IM-TH53003E-EN / IM-TH56002A-EN Iss: 05/2023...
- Page 2 Never use the device to work on any materials containing asbestos! The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. TH52002C-TH53003E-TH56002A Instruction & User Manual...
-
Page 3: Table Of Contents
Contents INTRODUCTION SAFETY PRECAUTIONS PARTS OF THE JACK STAND MAINTENANCE SPECIFICATIONS OPERATING INSTRUCTIONS WARRANTY STATEMENT TH52002C-TH53003E-TH56002A Instruction & User Manual... -
Page 4: Introduction
6. After lifting the vehicle, support immediately with properly rated jack stands. 7. Never work on or under a vehicle without using properly rated jack stands. 8. Only use on solid, even and level ground TH52002C-TH53003E-TH56002A Instruction & User Manual... -
Page 5: Parts Of The Jack Stand
L min. L max. use of the jack stands. Check for cracked welds (mm) and damaged, lose or missing parts. TH52002C TH53003E TH56002A Any jack stands which appears to be damaged in any way, found to be badly worn, operates... -
Page 6: Operating Instructions
NOTE The stands must only be positioned on a hard level surface when operational. The rated load of 2/3/6 Tonnes (TH52002C / TH53003E/ TH56002A) per pair must not be exceeded under any circumstances. Centre load on the top saddle. Use as a matched pair to support one end of a vehicle only. -
Page 7: Warranty Statement
Repairs have not been attempted by an unauthorised person and no modifications have been made to the product. Repairs have not been undertaken using non-genuine spare parts. JCB Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. TH52002C-TH53003E-TH56002A... - Page 8 If a product develops a fault after 30 days a warranty claim must be submitted. JCB TOOLS WILL NOT BE LIABLE FOR ANY INJURIES OR CONSEQUENTIAL DAMAGES RESULTING FROM USE OF THIS PRODUCT. EU IMPORTER: TRADE HOUSE FORSAGE INSTRUMENT POL SP .Z.O.O.
Need help?
Do you have a question about the TH52002C and is the answer not in the manual?
Questions and answers