Femometer XN/MD-2267R Instructions Manual

Electric breast pump

Hide thumbs

Table Of Contents

Quick Links

Download this manual

ELECTRIC

BREAST PUMP

HANDS FREE, BREASTFEEDING WITH EASE.

XN/MD-2267R

Table of Contents

Summary of Contents for Femometer XN/MD-2267R

Page 1 ELECTRIC BREAST PUMP HANDS FREE, BREASTFEEDING WITH EASE. XN/MD-2267R...
Page 3 You have to believe you are great. This is a wearable electric breast pump designed specifically for you to make breastfeeding more comfortable. I hope it can accompany you through this unforgetta- ble and special life journey easily. femometer...
Page 4: Table Of Contents
Table of Contents Product Using Wearable Description Pump Intended Technical Specifications Trouble Safety Shooting Getting Contains Started PAGE NAME PAGE NAME...
Page 5: Product Description
1. PRODUCT DESCRIPTION 1.1 PARTS * Spare part: valve Breast Shield(25mm) ..Tritan 22mm flange ..... Diaphragm ....... 18mm flange ....Pump Motor ...... Type-C Charging Cable ..Valve ........Bra Adjuster ...... Bottle Connector ....Bottle Lid ......180ml Bottle .......
Page 6 1. PRODUCT DESCRIPTION 1.2 CONTROLS ( The icon of Massage Mode and Suction Mode will light up at Simulation mode the same time . ) Massage Mode Battery Indicator Suction Mode Level Indicator Traction Mode Vacuum Down Vacuum Up On/off, mode switch NOTE: This product has a built-in li-ion battery.
Page 7: Intended Use
2. INTENDED USE 2.1 INDICATIONS FOR USE Powered breast pump, to express and collect milk from lactating women, to alleviate engorgement of the breast, maintain the ability of lactation, and provide mother’s milk for future feedings when separation of mother and baby occurs. The device is intended for a single user. 2.2 OPERATING LIFE The operating life of the Device is defined to be not less than 500 hours.
Page 8: Safety
3. SAFETY 3.1 WARNINGS This is a single-user product, use by more than one personal may present a health risk and voids the warranty. It’s recommended you consult with a licensed healthcare professional before using this wearable pump if you have an active implanted device that would be affected by a magnetic field (e.g.
Page 9 3. SAFETY 3.2 PRECAUTIONS Always inspect all parts before use for damage or cleanliness. Always ensure all parts are completely dry before assembling. Do not place the Pump Motor in the fridge or freezer. This wearable pump and its components are not heat-resistant. Keep away from heat sources.
Page 10: Getting Started
4.GETTING STARTED 4.1 CLEANING AND STERILIZING For the first time and after each use, you must disassemble, wash and sterilize all the breast pump parts that come into contact with breast milk. Disassemble and clean the parts come into contact with breasts and breast milk immediately after use to avoid residual breast milk that may cause bacteria to grow.
Page 11 4.GETTING STARTED Washable components Diaphragm Breast Shield flange Valve Bottle Connector flange 180ml Bottle Bottle Lid Cleaning washable components that come into contact with milk prevents the build-up of dry milk residue, which can cause the growth of bacteria that may be harmful to you and your baby.
Page 12 4.GETTING STARTED Clean washable components Sterilize washable components 1. Rinse in cold, clear water ( approx +20°C / +68°F ). Boil in water for not more than five minutes 2. Wash in warm water ( approx +30°C / +86°F) using milk dish washing soap and wipe afterwards with a clean cloth.
Page 13 4.GETTING STARTED 4.2 CHARGING When the battery is low in working process, the Battery Indicator light will flash. When charging, the indicator will light up and the pump will not turn on. Use the charging cable provided to connect the pump motor to a USB power source (5V 1A), such as your phone plug.
Page 14 4.GETTING STARTED 4.3 BREAST SHIELD SIZING This wearable pump comes with preassembled breast shield in 25mm and two additional silicone inserts in size of 22mm and 18mm, so you can find a breast shield fit that is comfortable for you. standard shield available accessories included in the box 25mm...
Page 15 4.GETTING STARTED 4.4 ASSEMBLING THE PUMP Make sure all parts are dry before putting them together (after the parts have been cleaned and sterilized). Insert the Diaphragm (02) to the upper part of the breast shield (01), the edge of the Diaphragm coincides with the edge of the breast shield, and the gap of the Diaphragm corresponds to the breast shield.
Page 16 4.GETTING STARTED Then place the Bottle Connector (05) on the milk bottle (06) and twist it clockwise until the arrow is aligned with the sign on the milk bottle. Insert the installed breast shield (01) into the Pump Motor (03) first, and then insert the milk bottle (06) into the bottom of the Pump Motor.
Page 17 4.GETTING STARTED In case that the standard Breast shield in 25mm(01) were too big for you, you may choose the 18mm(08) or 22mm(07) silicone insert, to be placed in the center of breast shield(01).
Page 18: Using Wearable Pump
5. USING WEARABLE PUMP 5.1 ALIGNING YOUR NIPPLE Correct nipple alignment in the Breast Shield is key to comfort, expression and performance. Your nipple must be positioned correctly in the Breast Shield tunnel before pumping to avoid discomfort.
Page 19 5. USING WEARABLE PUMP 5.2 FINDING THE RIGHT COMPRESSION This Wearable Pump is designed to be worn with your standard nursing bra and you can use it in either a sitting or standing position. Getting the right compression could impact milk volumes. This Wearable Pump needs to be firmly pressed against your breast, there should be no gaps between this wearable pump and your breast.
Page 20 5. USING WEARABLE PUMP 5.3 STARTING YOUR SESSION ( The icon of Massage Mode and Suction Mode will light up at Simulation Mode the same time . ) Massage Mode Battery Indicator Suction Mode Level Indicator Traction Mode Vacuum Down Vacuum Up On/off, mode switch MODE DESCRIPTION...
Page 21 5. USING WEARABLE PUMP Suction Mode The Suction Mode simulates the sucking characteristics of a baby, with a high and gentle suction force for efficient and clean sucking. There are 10 vacuum level settings in the Suction Mode, you can choose different level according to your needs.
Page 22 Press to increase or decrease to adjust the vacuum strength. Adjustable Massage Mode with 5 working levels. Adjustable Suction Mode with 10 working levels. Adjustable Simulation Mode with 10 working levels. Adjustable Traction Mode with 3 working levels. Short press , the default mode is Massage Then adjust to increase or decrease the levels...
Page 23 5. USING WEARABLE PUMP 5.4 STORING YOUR MILK After finishing your pumping session, push out the breast shield (01) ,then turn the bottle (06) from pump motor (03). you may store your expressed milk in the Bottle using the Lid (11) provided or pour your expressed milk into a container of your choice for storage or feeding.
Page 24: Technical Specifications
6. TECHNICAL SPECIFICATIONS Power Battery type and capacity Li-ion Polymer Battery Specification: 1300mAh Massage speed 80~130 CPM (Cycle Per Minute) Suction speed 26~110 CPM (Cycle Per Minute) Massage vacuum -0.007~0.016Mpa (+/-0.003Mpa), 5 levels adjustable Suction vacuum -0.011~0.033Mpa (+/-0.003Mpa), 10 levels adjustable Simulation vacuum -0.011~0.033Mpa (+/-0.003Mpa), 10 levels adjustable Traction vacuum...
Page 25: Trouble Shooting
7. TROUBLE SHOOTING Problem 1: Weak Suction or No Suction. CAUSE SOLUTION Check whether the diaphragm is Reinstall or replace the diaphragm. installed reversely or damaged. Check whether the connection between Tighten all connections. diaphragm and pump motor is tight. keep the breast shield fit the breast all the Check whether the breast shield fits the times with nipple in the center of breast...
Page 26 CONTAINS Portable Breast Pump Bra Adjuster (with 25mm standard shield/flange) 18mm flange Type-C Charging cable 22mm flange Nipple Measuring Tool （It's installed on the product already. If it doesn't fit, you can try another size.） Spare Diaphragm Cleaning Brush User Manual Spare Valve Bottle Lid SYMBOLS...
Page 28 1901, Dongguan Building, Jiangnan Avenue, Binjiang District Hangzhou, Zhejiang, China Guangdong Horigen Mother & Baby Products Co.,Ltd. No.18, Pingnan Industrial Zone, Mianbei Street, Chaoyang District, 515100 Shantou, Guangdong，China Shanghai International Holding Corp.GmbH(Europe) ADD: Eiffestrasse 80, 20537 Hamburg, Germany Customer Service：support@femometer.com Made In China...