Advertisement
Sound field
TOP MENU/
DIRECT
NAVIGATOR
3, 4, 2, 1
ENTER
DISPLAY
AUDIO ONLY
FL DISPLAY
AUDIO ONLY
PLAY MODE
REPEAT
D.RE-MASTER
D.RE-MASTER
S.SRND
S.SRND
SUBWOOFER
LEVEL,
CENTER
MIX 2CH
CENTER
FM MODE
FOCUS
SHIFT
You may experience a reduction in sound quality when these sound
field systems are used with some sources. If this occurs, turn the
sound field system off.
Dolby Digital and DTS
≥Dolby Digital and DTS are digital encoding systems used on DVD
to carry surround sound. Both were originally developed for use in
cinemas.
≥This unit automatically recognizes and decodes these systems.
Software encoded with Dolby
Digital can be identified with
this mark.
Play a Dolby Digital or DTS source.
∫ To down-mix Dolby Digital or DTS (multiple
channel) signals to 2 channels
Press [SHIFT]i[MIX 2CH].
To cancel, press [SHIFT]i[MIX 2CH]
again.
When "D.MIX" is flashing [DVD-A]
The DVD-Audio contains multiple-
channel signals that cannot be down-mixed.
RQT7035
26
RDS
DVD/CD
AV SYSTEM
TUNER/BAND
W
X
SLOW/SEARCH
SKIP
VCR
TV
TV/AV
MENU/
PLAY LIST
ENTER
RETURN
P.MEMORY GROUP
TIMER
1
2
3
4
5
6
7
8
9
S10/-/--
CANCEL
ÎPL,
0
CH SELECT
SUBWOOFER
PL
FOCUS
LEVEL
SFC
SFC,
TEST
MIX 2CH
CH SELECT
TEST
SHIFT
MUTING
VOLUME
TV
VOLUME
SETUP
Software encoded with DTS
can be identified with this
mark.
2CH
Dolby Pro Logic
Dolby Pro Logic is an active process that enhances sound
localization through the use of a high separation decoding method
providing improved spatiality and a wider listening area. The sense
of directionality is enhanced by the Left, Center, Right and Surround
channels. Dolby Pro Logic decoding is best utilized with sources
encoded in Dolby Surround.
Software encoded with Dolby Surround can be identified with this
mark (DVD, CD, Video CD, Laser Disc, Video tape).
1
Press [ÎPL].
2
Play a Dolby Surround source.
To cancel
Press [ÎPL].
[Note]
≥Turn the Dolby Pro Logic off when playing a DVD recorded with
Dolby Digital or DTS. The surround effects will not be reproduced
correctly if this is left on.
≥Super Surround (
Speaker level adjustments
s, r
If the level of the speakers appears to be different while listening to a
source, adjust the level of the speakers to the same apparent level.
Preparation
Dolby Digital and DTS: Turn off the other surround systems.
Dolby Pro Logic: Press [ÎPL].
1 Press [SHIFT]i[TEST] to output a test signal.
Lch: Front left
Cch: Center
Rch: Front right
RSch: Right surround
LSch: Left surround
≥The surround channel for Dolby Pro Logic is monaural so the
indicator appears as "Sch" instead.
2 Press [VOLUME, r] or [s] to set the volume level normally
used for enjoying the source.
3 Press [3] (to increase) or [4] (to decrease).
L, R:j16 dB to 0 dB
C, RS, LS, S:j10 dB to i6 dB
To stop the test signal, press [SHIFT]i[TEST] again.
∫ To adjust speaker level during play
1 Press [SHIFT]i[CH SELECT] to select the speaker.
Each time you press the buttons:
In Dolby Digital and DTS
Lch>Cch>Rch>RSch>LSch>SWch
^----------------------------------------------------------------}
SWch: Subwoofer
≥You can only adjust SWch if the disc includes a subwoofer
channel.
In Dolby Pro Logic
Lch>Cch>Rch>Sch
^-----------------------------------}
2 Press [3] (to increase) or [4] (to decrease)
L, R: j16 dB to 0 dB
C, RS, LS, S: j10 dB to i6 dB
SW: j10 dB to i10 dB
[Note]
You can also adjust subwoofer level by pressing [SUBWOOFER
LEVEL].
page 27) switches off.
PL
Advertisement
