Nave GALAXY Manual page 9

Remote control
5273261_Manual_17033_04_V1.docx
1. R-button: Red light on/off
2. Microphone-button: Connect with Bluetooth (BTK10) or
USB flash drive.
Note: In addition, by pressing the microphone button, the
water wave and starlight can be switched on.
3. I<-button: Play the previous track
4. - -button: Volume down
5. B-button: Blue light on/off
6. S+-button: Increase water wave mode
7. S- -button: Decrease water wave mode
8. H-button: Press about three seconds to cancel the timer
function. The water wave and laser light flashes and an
acoustic tone sounds.
9. FADE 2-button: The water wave light moves circularly in
RB-RG-RW-BG-BW-GW double color mode, and the laser
light switches to gradation mode.
10. LED-button: Water wave light on/off
11. LASER-button: Laser light on/off
12. G-button: Green light on/off
13. +-Button: Volume up
14. >I-Button: Play the next track
15. FADE 1-button, the water wave light moves circularly in R-
G-B-W single color mode and the laser light switches to
gradation mode (same function as when turning on).
16. W-Button: White light on/off
Note: If you press two color buttons one after the other,
you will have a two-color light.
17. Brightness-button: Control the water wave light (70% -
40% - 40% - 70% - 100%).
18. LASER-light-button: To either leave the laser light on or
switch to gradation mode.
19. 2H-button: press about three seconds and after 2 hours
product turns off.
Note: When the water wave and laser light flashes and an
acoustic sound sounds, the timer function is turned on.
20. 1H-button. press about three seconds and after 1 hour
product turns off.
Note: When the water wave light and laser light flashes
and an acoustic sound sounds, the timer function is on.
21. MUSIC-Button: Play track on/off
9 / 11