Boss RGE-10 Instructions Manual page 4

Table of Contents

Advertisement

<Rear Panel>
0
INPUT JACKS
To this jack, connect an electric guitar, electronic musical
instrument, tape recorder etc.
The standard phone jack and the pin jack do not work
at a time.
When both are used at the same t;me, the stan¬
dard ohone will have priority.
0 LEVEL SWITCH
Select either position depending on the type of the device
you use,
Usualiy, when an electric guitar or electronic
musical insfumen: is used, set this switch to "-20d6m",
and when audio equipment is used, set it to "-10dBm".
0
OUTPUT JACKS
Connect this to a guitar amplifier, tape recorder etc. Both
standard phone and pin jacks work simultaneously.
© EFFECT REMOTE JACK
By connecting an options! footswitch FS-1 to this jack, you
can turn the unit tc the Effect On (= equalizer mode) or
to the Ef*ect Off (= norma! mode) without reaching out
your hand.
When the Efrect Switch on the front panel is turned off,
the footswitch does not work.
© AC ADAPTOR JACK
Usually, connect the AC adaptor (BOSS PSA-120, 220 or
240) to "IN". However, for supplying power to other BOSS
Micro Rack Series, connect the supplied DC cord to "OUT".

Advertisement

Table of Contents
loading

Table of Contents