Restart Your Computer - D-Link DFL-700 Quick Installation Manual

Network security firewall

Hide thumbs Also See for DFL-700:

Restart your computer

To obtain a new IP address from the DFL-700 you will need to

restart your computer. Make sure that the network adapter in your

computer is configured properly first. Instructions on how to

configure the network adapter to obtain an IP address

automatically from the DFL-700 can be found in the appendix.

STATUS LED – will flash

consistently to indicate that the

DFL-700 is working properly.

POWER LED – a solid light

indicates a proper connection

to the power supply.

NETWORK LEDs – a solid light on the

port indicates a connection to an

Ethernet enabled computer. These

LEDs blinks during data transmission.

Table of Contents