Advertisement
Manufactured in China for:
DELTA-OPTI Monika Matysiak,
60-713 Poznan, 10 Graniczna St., Poland
www.shopdelta.eu
RG-EST350-V2 Wireless Bridge User Manual
Note
The device and software may update without prior notification. Please
contact Ruijie technical support for details.
Before You Begin
Package Contents
Management software WSP-EST350 V2 has been installed on the device.
Part Description
RG-EST350 V2 Wireless Bridges
Phillips Pan Head Screws (ST4.2X19)
Hose Clamps
Mounting Brackets
Universal Joint Assemblies
Universal Joint Nuts
RG-EST350 V2 Product Manual
24V/0.5A PoE Power Adapters
Wall Anchors
Power Cord
Warranty Card
1
Qty
2
8
2
2
2
2
1
2
6
2
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Delta-Opti RG-EST350-V2
Summary of Contents for Delta-Opti RG-EST350-V2
- Page 1 Manufactured in China for: DELTA-OPTI Monika Matysiak, 60-713 Poznan, 10 Graniczna St., Poland www.shopdelta.eu RG-EST350-V2 Wireless Bridge User Manual Note The device and software may update without prior notification. Please contact Ruijie technical support for details. Before You Begin Package Contents Management software WSP-EST350 V2 has been installed on the device.
- Page 2 Networking Camera Switch Switch Camera - Switch (Optional) - Camera End NVR End – Switch - NVR LED & Ports LED & Ports Description 1. LED a. SYS LED Blinking: The system is initializing, restoring factory settings,...
- Page 3 upgrading or resetting. On: The device is working properly. Off: The device is not powered on. b. LAN1/LAN2 LED Off: The LAN port is not connected. Blinking Green: Link is up. The port is sending or receiving data. Solid Green: Link is up. The port is not sending or receiving data. c.
- Page 4 Plugging the Ports NVR End PoE Power Adapter LAN1/PoE Port PoE Max Distance: 100m (Cat5e/6/6a/7/8 Cable) Camera End PoE Power Adapter LAN1/PoE Port PoE Max Distance: 100m (Cat5e/6/6a/7/8 Cable)
- Page 5 Installing the Device Pole Mounting Assemble the mount Secure the device on a Adjust the orientation. kit. pole by using a hose clamp. Wall Mounting Assemble the mount Adjust the orientation. Drill holes into kit. marked positions and insert wall anchors.
- Page 6 Managing the Device App Management (Recommended) The wireless bridges are used in pairs without extra configuration. You can scan the following QR code to download an App to manage the bridges. Navigate to Project > + Create a Project > Scan QR-code to manage the device.
Need help?
Do you have a question about the RG-EST350-V2 and is the answer not in the manual?
Questions and answers