Drainage Connection; Drinking Water Connection; Electrical Connection - Bosch SMS4HCC48E Information For Use

en Installation and connection
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
Follow the safety instructions.
1.
→ Page 4
Follow the instructions for electrical
2.
connection.
Check the Scope of supply and
3.
the condition of the appliance.
Consult the installation instructions
4.
for the installation dimensions re-
quired.
Make the appliance level using the
5.
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
Install the drainage connection.
6.
→ Page 12
Install the drinking water connec-
7.
tion. → Page 12
Connect the appliance to the
8.
power supply.
4.3 Drainage connection
Connect your appliance to drainage
connection so dirty water is dis-
charged via the wash cycle.
Installing the drainage connection
Consult the installation instructions
1.
supplied for the steps required
here.
Connect the wastewater hose to
2.
the outlet connection of the siphon
using the enclosed parts.
When doing so, check that the
3.
wastewater hose is not kinked,
crushed or twisted.
Also check that there is no cover
4.
in the drainage system preventing
the wastewater from being dis-
charged.
12
4.4 Drinking water connec-
tion
Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note
¡ If you are replacing the appliance,
you must use a new water supply
hose.
Consult the installation instructions
1.
supplied for the steps required
here.
Connect the appliance to the drink-
2.
ing water connection using the en-
closed parts.
Observe the Technical data.
When doing so, check that the
3.
drinking water connection is not
kinked, crushed or twisted.
4.5 Electrical connection
Connecting the appliance to the
electricity supply
Notes
¡ Follow the Safety instructions
→ Page 4.
¡ Please note that the water safety
system is only functional if there is
a power supply.
Insert the non-heating appliance
1.
plug of the power cable into the
appliance.
Insert the mains plug of the appli-
2.
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate.
Check the mains plug is inserted
3.
properly.