Advertisement
4.
HOSE USE
F
WARNING! Ensure you have read, understood, and apply chapter 1 safety instructions when using the hose.
4.1.
Turn off and disconnect the air supply.
4.2.
Locate the ball grip on the hose and pull the hose out of the unit until you have extended it to the area of use. An intermittent fast
clicking noise will be discerned as the hose passes through the clamping mechanism. When you stop pulling the hose it will remain
clamped at that length.
4.3.
To extend the hose further, take the ball grip and continue to pull accordingly.
4.4.
Connect the hose to air tool. Connect and turn on the air supply.
4.5.
To release and allow the hose to automatically rewind, extend the hose a little further, and release during the intermittent stage
between the fast clicking noise. Practice so that you will be familiar with the feel of the hose, thus eliminating any reliance upon sounds.
4.6.
Turn off and disconnect the air supply.
5.
MAINTENANCE & STORAGE
F
WARNING! Before attempting maintenance or inspection, release any pressure remaining in hose.
5.1.
Clean the hose and main housing regularly. DO NOT spray or wet the product, but clean with a damp cloth.
p
DO NOT use solvents or detergents, as these may permanently damage the item.
5.2.
Periodically check reel for leaks and the hose has a smooth extending operation. Check main housing
outlet rollers are in good order.
5.3.
Oil the joints and shaft in the reel through the hexagonal hole in the case.
5.4.
To increase the tension on the internal spring, place phillips screw driver in screw to secure (fig 2) and turn
the hex adjuster clock-wise. To de-crease the tension, turn the hex adjuster anti-clockwise.
F
WARNING: DO NOT attempt to undo, or remove any casing screws yourself, as a high tension
spring is enclosed which if exposed may spring out causing serious personal injury.
p
Replacement of the supply hose should be carried out by skilled personnel only, consult your nearest authorised service agent.
5.5.
STORAGE:
Should you wish to store the air hose away, ensure it is clean, and dry. Place the item in a dark, safe, dry, child proof location, where
the temperature will remain reasonably stable. DO NOT store in nylon, or plastic bag as this will encourage condensation.
6.
PARTS LIST
AIR HOSE REEL Model SA90
89/392/EEC and following modifications
EN292-1 Safety of the machine : General design methods.
EN292-2 Safety of the machine: Technical principles and spec-
ifications.
EN294 Safety of the machinery: Safety distances to prevent
danger zones being reached by the upper limbs
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required
for any claim. INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address including your postcode.
Declaration of Conformity
in conformity with the following EEC standards and directives
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
Original Date:- 011199
Issue Date:-
Version Nbr:-
Date Modified:- N/A
We, the sole importer into the UK, declare that the product listed here is
The construction file for this product is held by the Manufacturer and may be inspected, by a national
authority, upon request to Jack Sealey Ltd.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Tools
01284 757500
01284 703534
Item No
Part No
18
370-018
011199
19
370-019
0
31
370-031
32
370-032
33
370-033
34
370-034
35A
370-035A
44
370-044
65A
370-065A
85
370-085
87
370-087
89
370-088
91
370-091
96
370-096
97
370-097
98
370-098
99
370-099
100
370-100
101
370-101
103
370-103
105
370-105
106
370-106
126
370-126
127
370-127
129
370-129
130
370-130
146
370-146
147
370-147
148
370-148
149
370-149
150
370-150
151
370-151
152
370-152
153
370-153
154
370-154
166
370-166
1st November 1999
E-mail: sales@sealey.co.uk
Web address: www.sealey.co.uk
fig 2
Description
Screw
Screw
Seal
Washer
Swivel joint
Screw
Pipe connection
Nut
Swivel
Spring
Drum cover
Ratchet hook
Circlip
Guide hose roller
Spring linkage shaft
Circlip
Spring for hook
Screw
Nut
Nut
Spacer for roller
Screw
Screw
Rubber stopper
Screw
Screw
Left side body
Right side body
Spring housing
Winder drum
Flexible hose
Roller support
Half support
Revolving stand
Nut
Washer
SA90 - 2 - 190702
Advertisement
