Advertisement
Quick Links
Advertisement
Summary of Contents for Pulse Shower Spas PolarSpa PPS-5000
- Page 1 PolarSpa Model #PPS-5000 Owner's Manual...
- Page 2 PolarSpa Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
- Page 3 Parts Legend 1. Chiller 6. Filter 11. Cover Clips 2. Control Panel 7. Water Hoses 12. Freestanding Tub 3. Carry Handles 8. Power Cord 13. Wooden Cover (sold separately) 4. Wheels 9. Drain Valve 5. Cooling Fan (back) 10. Tub Cover...
-
Page 4: Safety Warnings
SAFETY WARNINGS Congratulations on your purchase of an ice-bath machine, to ensure proper installation and operation, please read this manual carefully, thanks! • Electricity is very dangerous, in order to prevent accidents, please pay attention and make sure the local electricity is suitable for the machine before using •... - Page 5 Operation Instructions CONTROL PANEL 1. ON/OFF button: Press and hold it for 2 seconds to start or stop the cooling system. 2. MODE button: For entering different modes with ICE BATH/DEFAULT, AUTO, CONSTANT, normally it is unnecessary to change it by the user if just using for ice-bath. ICE BATH/DEFAULT Mode is just for ICE-Bath machines. it may not work well or temperature can not be changed under CONSTANT or AUTO modes.
- Page 6 Operation Instructions 7. SYSTEM information: For indicating the current working status of machine under AUTO, HEAT, COOL, OFF or EMER. 8. FAN or DEFROST information: For indicating the current working status of cooling fan under ON or AUTO(old version). For indicating the current working status of defrosting under heating the water in low ambient temp 9.
- Page 7 Installation Instructions HOW TO INSTALL MACHINE IMPORTANT: Before tightening the connections, please make sure you are using the right type of o-ring and tighten them appropriately. The system cannot start if installation has a problem with any air leakage, and normally the error code E3/E1/FL/version number will show up on the display. Must reinstall the uv sterilizer for first use if the machine with uv sterilizer, don't connect the hoses to any water sources and plug the machine to the AC socket before that.
- Page 8 Operation Instructions How to use the chiller Please refer to the paragraph 1 and 2 to get to know all WARNINGS and the description of machine before use. Please refer to paragraph 3 to install the machine with your bathtub or pool before use. Especially the first time, after turning on the machine or when the machine pump is working, the error code or ver- sion code will show up on the display, the vacuum time depends on how much air inside the water loop.
- Page 9 Chiller Operation through APP...
- Page 10 Accessories Wood table SOLD SEPARATELY For parts and accessories visit www.pulsepolarspa.com All images shown are for illustration purposes. Actual product may vary due to product enhancement...
-
Page 11: Manufacturer's Limited Warranty
MANUFACTURER'S LIMITED WARRANTY 1. Defects Covered; Warranty Period: Pulse Shower Spas, 5. No Other Warranties; Limitation of Liability: OTHER Inc. (“Pulse”) warrants to the original consumer purchaser THAN THE LIFETIME LIMITED WARRANTY STATED who purchases this shower spa (the “Product”) for use in... - Page 12 NOTES PULSE ShowerSpas, Inc. | 297 Anna Street | Watsonville, CA 95076 | 831.724.7300 www.PulsePolarSpa.com PM-AA-01...
Need help?
Do you have a question about the PolarSpa PPS-5000 and is the answer not in the manual?
Questions and answers