Advertisement
6.
TROUBLESHOOTING
Grease gun pumps little or no grease.
Excessive grease leaking past the follower.
If the gun still doesn't operate.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Barrel not completely tightened.
Air Pockets are trapped in grease.
Blocked grease gun extension.
Grease too thick or cold.
Follower is damaged.
sales@sealey.co.uk
Original Language Version
Tighten the barrel completely.
Remove air pocket by referring to
"Removing trapped air" section.
Remove the extension and operate the
grease gun. If the gun
Dispenses grease then the gun is fine.
Clean or replace the extension.
Store grease gun and grease away from
extreme cold or use thinner
Grease.
Replace the grease gun.
Contact nearest authorized service dealer.
www.sealey.co.uk
AK4402.V2 Issue:1 03/07/23
REGISTER YOUR
PURCHASE HERE
Advertisement
