Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Giada RD01
- Page 1 - 1 -...
- Page 2 Statement The copyright of this manual belongs to Shenzhen JIEHE Technology Development Co., Ltd. (Giada, JIEHE’s global brand) and all rights are reserved. The company reserves the right to change this manual at any time without notification. Specifications here are for reference only, please take the real product as standard.
-
Page 3: Table Of Contents
2.1 Interface Description ..............2 2.2 Hardware Specifications ..............3 2.3 RD01 Packing list ................3 3. Before Start ................3 3.1 Connect the RD01 Dock Board Device ........3 3.2 Add the Sensor ................6 3.3 Modify the Sensors ..............7 3.4 Remove the Sensors ..............8... -
Page 4: Product Introduction
RD01 can provide GPIO and I2C expansion for PCs, enriching the application scope of PCs. RD01 supports both DC and USB type-C power supply, with an input voltage of 5V. The phoenix connector of GPIO provides 3.3V/5V power output, and the I2C interface provides 3.3V power output. -
Page 5: Hardware Specifications
Before start, you need: Giada player as terminal with RD01 sensor docking station. Giada player as Host PC with screen and installed the Windows10 64bit OS. A DB9 RS232 serial cable or a USB type-C to type-A cable. - Page 6 3.1 Connect the RD01 Docking Station A. Connect the RD01 docking station to the Windows Host PC via Type-C or COM port. The “PC” LED will light up. Notice: This configuration tool only supports for window 10 operating system B. Enter the device manager，Then find the Prolific USB-to-Serial Comm Port under the Ports(COM &...
- Page 7 Connect RD01 to the sensor docking station D. The “Press Sensor”can be shown in Docking configuration software after successfully connection. - 5 -...
-
Page 8: Add The Sensor
3.2 Add the Sensor Click the button of "Add" and you can add the sensor. At present it can support the following several sensors. Pressure sensor( FSR402/4);The port type is GPIO;The parameter is null； Laser Ranging Sensor (VL53L0X);The port type is I2C;The parameter is {addr=0x52}； ... -
Page 9: Modify The Sensors
3.3 Modify the Sensors Make sure that you select the sensor that you want. Then click the button of “Alter sensor”to modify the parameter(Display a pop-up tip indicates success). - 7 -... -
Page 10: Remove The Sensors
3.4 Remove the Sensors Make sure that you select the sensor that you want. Then click the button of “Delete Sensor”to modify the parameter(Display a pop-up tip indicates success). - 8 -... - Page 11 - 9 -...
Need help?
Do you have a question about the RD01 and is the answer not in the manual?
Questions and answers