ML Accessories SK006 Installation & Maintenance Manual

Advertisement

INSTALLATION & MAINTENANCE MANUAL
SK006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SK006 and is the answer not in the manual?

Questions and answers

Summary of Contents for ML Accessories SK006

  • Page 1 INSTALLATION & MAINTENANCE MANUAL SK006...
  • Page 2 These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: SK006 SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
  • Page 3 SK005A SAFETY This product must be installed in accordance with the latest edition of the IEE Wiring Re • (BS7671) and current Building Regulations. If in any doubt, consult a qualified electricia • Please isolate mains prior to installation or maintenance INSTALLATION •...
  • Page 4 • Remove the mounting collar and rubber gasket by rotating anti-clockwise • Insert the product through the hole, place into the desired orientation, insert the rubber gasket, and tighten the mounting collar to the underside (see Fig. 2) Fig. 2 Fig.
  • Page 5 Connect to the mains supply via the pre-wired cable and plug Connect to the mains supply via the pre-wired cable and plug • OPERATION OPERATION OPERATION To raise the product, gently lift the handle on the top cover. Raise until it clicks, this me To raise the product, gently lift the handle on the top cover.
  • Page 6 ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML...
  • Page 7 Always use the handle to raise/lower the product (see Fig 4) Always use the handle to raise/lower the product (see Fig 4) • • Fig. 4 Fig. 4 Fig. 4 WARNING This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing.
  • Page 8 SUPPLIED BY: (UK) MANUFACTURER ML ACCESSORIES LTD, UNIT E CHILTERN PARK, BOSCOMBE ROAD, DUNSTABLE LU5 4LT, WWW.MLACCESSORIES.CO.UK (EU) SLV LIGHTING GROUP, DAIMLERSTRASSE 21-23, 52531 ÜBACH-PALENBERG, GERMANY EMAIL: EPREL@GROUP.SLV.COM MADE IN CHINA ML Accessories Limited LU5 4LT www.mlaccessories.co.uk Made in China...

Table of Contents