Disassembly - Pioneer CT-1160R Service Manual

CT-1160R;, CT-S55R
3. DISASSEMBLY
3.1 TAPE TRANSPORT UNIT
DISASSEMBLY
1. Remove the bonnet.
@ Undo the two screws (left and right) securing the bonnet to the
rear panel.
Bonnet
2. Temporarily pass the counter belt around a chassis hook.
3. Remove the tape transport unit.
e@ Undo the four screws securing the unit, and remove by lifting
out diagonall towards the rear.
3.2 FRONT PANEL REMOVAL
e@ Undo the screw along the bottom of the panel, and disengage
the three upper and three lower hook catches.
Upper hook catch
(three places)
Lower hook catch
{three places)
3.3 COUNTER BELT REPLACEMENT
4. Remove the motor bracket.
e@ Undo the three screws, and remove the motor bracket from the
mechanism chassis.
1. Remove the tape transport unit from the deck.
(see page 5)
2. Remove the cassette plate.
e Undo the screw at the top right hand corner, and remove by
lifting out diagonally towards the front.
Cassette plate
3. Replace the belt, and reassemble in the reverse order.
5. Replace the belt, and reassemble in the reverse order.
3.4 CAPSTAN BELT REPLACEMENT
Capstan belt
1. Remove the tape transport unit from the deck.
(see page 5)
2. Loosen the cordfixers, and free the lead wires.
3. Remove the lead wire holder.
Cordfixer B
Lead wire holder