Advertisement
Quick Links
Production and trading with household appliances
www.eldominvest.com service@eldominvest.com
HEATING WOOD STOVE WITH WATER HEATER /TO
BE BUILT IN/ ON SOLID FUEL
Model "EWXL"
SPECIFICATIONS
INSTRUCTIONS FOR INSTALLATION AND USE
WARNING! Before installing and operating the wood
burning stove read carefully the instructions!
1
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Eldom EWXL
- Page 1 Production and trading with household appliances www.eldominvest.com service@eldominvest.com HEATING WOOD STOVE WITH WATER HEATER /TO BE BUILT IN/ ON SOLID FUEL Model “EWXL” SPECIFICATIONS INSTRUCTIONS FOR INSTALLATION AND USE WARNING! Before installing and operating the wood burning stove read carefully the instructions!
- Page 2 1. Specifications: Wood stove model / Specifications EWXL Maximum heat output, kW Space heating output, kW Maximum water jacket power, kW Efficiency, % Heated volume, m³...
- Page 3 building and technical standards; The wood stove with built-in water heater is designed for building in and therefore the niche in which it would be built-in must be constructed of non- combustible material. The stove must be installed on a horizontal fireproof floor with the necessary capacity.
- Page 4 The stove must get fresh air of at least 4 m³ / h for each kW thermal power. Where appropriate secure an air flow from adjacent premises or outside air. The stove combustion process must not experience shortage of air due to the gravity effect or due to forced aspirations, since this is a prerequisite for the incomplete combustion or returning of flue gases inside.
- Page 5 4. Operating instructions Comply with the instructions of this manual for stove proper operation and prevention of accidents. Before beginning any operation, as user you must have read and fully understood the contents of this instruction manual; The unit cannot be used by people (including children) with reduced physical, visual or mental abilities or with little experience and knowledge, unless they have been trained and instructed how to use it by the person responsible for their safety;...
- Page 6 performed by an authorized organization. The installation must comply with all applicable standardization documents /regarding operation and safety/. The heating stove on solid fuel with water heater which you have purchased gives you the perfect opportunity to heat the adjacent rooms with radiators.
- Page 7 The manufacturer does not give warrant y on the operation of the heating system, but only on the wood stove . Calculation s and installation of the heating system to be carried out by an authorized and licensed organization! In case of improper joining, due to the increased pressure, a bulging of the water heater and rupture of the welds occur.
- Page 8 6. Way of working 6.1. First ignition After installing and connecting the stove to the chimney, be sure to check the bricks integrity within the stove and their assembly. Make sure that the grill in the combustion chamber is properly located and lies right at the base and is not shifted during the unit transportation.
- Page 9 Fig. 4 ЗАТВОРЕНО ОТВОРЕНО OPEN CLOSED 6.3. Criteria for proper combustion Burning must run with the presence of flames until the conversion of wood into embers. The purpose is to prevent smoldering and smoke. Smoke is not a normal product of burning wood, but is a consequence of poor combustion. Refractory bricks in the firebox must maintain their natural color in tan, not in black.
- Page 10 pipes. •Painted surfaces should be cleaned with a damp cloth. Do not use detergents. If you want to refresh the paint, use a suitable spray bottle. •Wipe the stove glass with a damp cloth, if necessary, it can be washed with detergent and tap water after removing it from the door.
Need help?
Do you have a question about the EWXL and is the answer not in the manual?
Questions and answers