Both sensors are seamlessly coupled to a 12-bit analog to digital-converter. This results in superior signal quality. The TSM400-4-CPTH multi-sensor is housed in a slim plastic enclosure. The bottom part of the enclosure is suitable for installation on standard flush-mounted/cavity wall boxes ø68mm, with installation openings on 61 mm.
To avoid solar radiation, the sensor should not be installed next to windows or directly in the sunlight; • Sensors shall be installed in a place with sufficient air circulation. TSM400-4-CPTH sensor is intended for installation on a cavity wall box with 68mm diameter and 61 mm screw spacing. TSM400-4-CPTH_R1.7 – November 2023 Page 4...
Release the button. The sensor will restart with factory default settings. 11. Firmware update The firmware of the sensor can be updated with a Teracom controller which supports MODBUS RTU or MBRTU-Update software. For more details ask your dealer. TSM400-4-CPTH_R1.7 – November 2023...
Need help?
Do you have a question about the TSM400-4-CPTH and is the answer not in the manual?
Questions and answers