Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Veracity VPSU-POE-1000
- Page 1 Installation GUIDE 1kW Power Supply | VPSU-POE-1000 Version 1.3...
- Page 2 4 Dow Road Prestwick KA9 2TU Veracity's Authorised Representative in the EU (as required by EU law for CE marked goods) is: EU Authorised Representative: Comply Express Unipessoal Limitada, StartUp Madeira, EV141, Campus da Penteada, 9020 105 Funchal, Portugal VERACITY 1kW POWER SUPPLY INSTALLATION GUIDE |...
- Page 3 References to further product information are listed at the end of this guide or may be downloaded from the Veracity website www.veracityglobal.com. Refer to these resources for full product information, information about terms and conditions of use, limited warranties, returns, software licence agreements, environmental and recycling procedures, and any other regulatory notices.
- Page 4 Use the product only with the equipment it is specified for. Repair and service of the product shall be provided by Veracity or an authorised third party. Do not attempt to repair the product by yourself. Ensure that the product is securely held, at all times as dropping the product will almost certainly damage it (possibly beyond repair) and more importantly, may cause severe personal injury, especially to hands and feet.
- Page 5 M4 x 8mm x 4 countersink screws for attaching power supply to mounting bracket. Mains Cable (IEC C13 style) 400mm DC power patch cables x 4 This Installation Guide. VERACITY 1kW POWER SUPPLY INSTALLATION GUIDE | V 1.3 | 2022 | 5...
- Page 6 Maximum Power LED Maximum power capability exceeded. Power Connectors AC Connector. IEC C14 inlet. Use supplied mains cable. DC Connector. Molex micro-fit style. Use supplied patch cables. VERACITY 1kW POWER SUPPLY INSTALLATION GUIDE | V 1.3 | 2022 | 6...
- Page 7 -10 °C to 70 °C (14 °F to 104 °F) E) Installation Note that the 1kW Power Supply is designed for use with Veracity HIGHWIRE Base 4 (VHW-HWPS-B4) and Base 8 (VHW-HWPS-B8) devices as well as LONGSPAN Base 8 (VLS-LS-B8), while installed in the associated Tray Base chassis (VRM-TRAY-BASE).
- Page 8 Patch cables not securely attached between PSU and associated equipment. iii. Equipment power cycling. Check PSU power meter for overload situation. Disconnect equipment individually to determine faulty unit. VERACITY 1kW POWER SUPPLY INSTALLATION GUIDE | V 1.3 | 2022 | 8...
Need help?
Do you have a question about the VPSU-POE-1000 and is the answer not in the manual?
Questions and answers