Western Digital My Book WDH1Q10000 User Manual page 23

Disk Status Messages
WD RAID Manager reports the following messages depending on the current status
of your Disk A and B.
Displayed Status
Text
Good
No hard disk
No Config
Faulty
Rebuilding
Good
Rejected
Description
The slot configuration
contains valid data.
Consult the array status
to see if other errors have
been detected.
The slot contains no HDD Install drive in empty slot.
The slot does not contain
a valid configuration.
The slot is marked as
faulty.
The slot is currently being
rebuilt from the other slot.
Initialization failed to
complete.
The slot contains an HDD
that does not meet the
unit's requirements.
MY BOOK STUDIO EDITION II
USER MANUAL
User Action
None
Create New RAID set. (Loss of
data)
Mismatched capacity. Replace
drive with identical capacity
drive and re-create RAID set.
Replace drive.
Wait for rebuild to complete.
This will take several hours.
Replace other drive.
Install drive that is compatible
with RAID device.
Only WD Green Drives are
compatible.
WD RAID MANAGER FOR MAC – 20