MiniTracker 4™ Getting Started Congratulations on the purchase of your new AVID MiniTracker 4™ microchip scanner! Need to get started quickly? Just follow these instructions : 1. Remove your new scanner from the packaging. 2. Press the power button on the right-hand edge.
MiniTracker 4™ Changing the Batteries To replace the batteries: 1. Unscrew the two screws on the back of the case, either side of the label. 2. Remove the old batteries. 3. Insert the new batteries. 4. Replace the back and tighten the screws to fix it in place.
MiniTracker 4™ Firmware Updates As part of our continuous product development we will release updates to the firmware installed on the scanner. To install these updates please visit the following website where full instructions will be provided : https://minitracker.avidid.com If you require any further assistance please contact your local support office as detailed in the Warranty and Customer Service section.
MiniTracker 4™ Specifications MiniTracker 4™ Specifications Operating Frequency : 134.2 kHz Storage (microSD) : 20 million time-stamped pet ID records 128GB 320 million time-stamped pet ID records Data Connections : Bluetooth® 5.3 and USB Display : 240x320 color LCD Sound :...
MiniTracker 4™ Regulatory Information FCC ID : IOL-134-AV1050 Contains FCC ID : IOL-BT840F This equipment has been tested and found to comply with the limits for a class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
MiniTracker 4™ Warranty & Customer Service The MiniTracker 4™ is warranted to be free of manufacturing defects for a period of one year from the date of purchase. Defective readers will be repaired or replaced at the discretion of Avid Identification Systems, Inc.
Need help?
Do you have a question about the MiniTracker 4 and is the answer not in the manual?
Questions and answers