Pixel PXUTVKT Installation Instructions Manual

Prior to star ng the installa on process we recommend the following:
1. Moun ng the Case
Determine the best loca on to mount the protec ve case. It is recommended to install the case in an area that
does not block the driver's vision.
2. Power Source
Find a power source, such as a fuse box, that is connected to the vehicle auxiliary power. It is recommended to
disconnect all vehicle power before star ng the installa on.
3. Audio Op ons
Locate the audio input for your sound system and determine which audio connec on type works best for your
installa on and audio requirements. If you are installing a Bluetooth Dock follow the instruc ons included with
the dock to pair audio.
4. Antenna Loca on
Locate a clear spot on the roof or the vehicle with no obstruc ons from the sky while the vehicle is moving. The
antenna cannot be installed on a lower part of the vehicle, as signal may be blocked as the vehicle moves in
different direc ons.
It is recommended to leave all cables lose un l the installa on is complete to ensure all wires will reach the loca on
of the protec ve case and mount.
Package Includes
(1) Protec ve Case with Zipper
(1) SiriusXM Magne c Antenna with metal plate
(1) SiriusXM Vehicle Dock
(1) Hardwired Power Adapter
Compa ble Satellite Radio Receivers
Included in the kit is the SXVD1 universal SiriusXM vehicle docking cradle. The docking cradle works with older Sirius
and XM receivers and newer SiriusXM pla orm receivers. Below is a list of compa ble receivers.
OnyX, EZ, PLUS, EZR
·
Xpress, EZ, R, RC, RCi
·
EDGE, MiRGE, TOUR
·
Delphi Roady XT, SKYFI 3
·
Pixel Technologies, Inc. | www.pixelsatradio.com | contactus@pixelsatradio.com | (800) 595-0845 | Page 1
PXUTVKT - Satellite Radio UTV Kit
Installa on Instruc ons
(1) RIDE COMMAND® Antenna Adapter Kit
(1) FMDA25 Direct Audio Adapter
(1) Mul -Angle Mount
(1) AMPs to Dual T-Notch Adapter Plate with Screws
Sportster 5 & 6
·
S le o 10, 100, 2
·
Starmate 3, 4, 5, 6, 7, 8
·
Stratus 3, 4, 5, 6, 7
·