Download Print this page

Ginlong SOLIS S3-WIFI-ST Connection Manual

Wi-fi dongle

Advertisement

Quick Links

SOLIS WI-FI DONGLE
CONNECTION GUIDE
USING IP ADDRESS
MODEL: S3-WIFI-ST
FRONT VIEW
Address: 5/109 Tulip St, Cheltenham
VIC 3192
BACK VIEW
W: www.solisinverters.com.au
Ph: 03 8555 9516
E: service@solisinverters.com.au

Advertisement

loading

Summary of Contents for Ginlong SOLIS S3-WIFI-ST

  • Page 1 SOLIS WI-FI DONGLE CONNECTION GUIDE USING IP ADDRESS MODEL: S3-WIFI-ST BACK VIEW FRONT VIEW Address: 5/109 Tulip St, Cheltenham W: www.solisinverters.com.au VIC 3192 Ph: 03 8555 9516 E: service@solisinverters.com.au...
  • Page 2 NOTE: The following steps are for iPhone and Android devices. Some images are of an iPhone but the same steps can be followed on Android devices. CONNECTING SOLIS WI-FI DONGLE STEP 1: • Make sure you have the details of your home Wi-Fi network (name and password). •...
  • Page 3 STEP 5: Open your internet browser e.g. Safari or Chrome and type the IP address 10.10.100.254 on the search bar. Then press Go/Search. See example below for iPhone (left) and Samsung (right). STEP 6: You should get a screen prompt asking for Username and Password. Username: admin Password: 123456789 Then Press Sign in.
  • Page 4 STEP 7: You will see a screen as shown below. From the top left corner, press Quick Set (second option). STEP 8: Then Press “Search” button and look for your house Wi-Fi. Address: 5/109 Tulip St, Cheltenham W: www.solisinverters.com.au VIC 3192 Ph: 03 8555 9516 E: service@solisinverters.com.au...
  • Page 5 STEP 9: Select your Wi-Fi name and ensure that the RSSI (signal strength) is more than 30%. Anything below 30% is not recommended. Click OK once you have selected your network. STEP 10: Enter your home Wi-Fi’s password. To verify, click Eye Symbol to see the password and then click Save.
  • Page 6 STEP 11: Once you see the message below, you can open your SolisCloud app and check your Datalogger Status. ‘ALL DONE’ NOTE: If setup is completed & there is no update in SolisCloud after 5 minutes. Please double check the Wi-Fi password, reset the dongle, and repeat all steps again. To reset the dongle, please click and hold Reset button at the back of the dongle for 35 seconds.
  • Page 7 STEP 12: Open SolisCloud App → open your Plant → click on Device → Click on Datalogger → click on the SN of your Datalogger as below to confirm if your datalogger is ONLINE (if offline, please repeat steps again): Address: 5/109 Tulip St, Cheltenham W: www.solisinverters.com.au VIC 3192...