KegLand KL38119 Manual

Thank you for choosing to purchase this quality product. To minimize the risk of injury, we ask you to always take some basic
safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Spare parts
Assembly
1. Wooden barrel assembly--- Assemble cage hoops (10) and cage slat (12), make sure all cage slats (12) with bevel edge are
in one direction, the opposite end with smooth edge in line in the opposite side. SEE P1
2. Threaded rod assembly (8), then mount to the base (13). NOTE: The threaded rod with the 2 small pieces, should be
assembled first. SEE P2
P1
3. The base of the press should be screwed to the floor or to a firm, solid base, using the holes in the feet (screws not
included). SEE P3
4. Put the filter bag (9) in the press with the threaded rod (8) through the hole in the filter bag. Stretch the filter bag over the
bucket. Then fill it with the chopped fruit and, if necessary press down the fruit by hand. When the juice bag is filled, fold it
inwards. SEE P3
Manuals for use of fruit press
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Bevel edge
smooth edge
Attention:
smooth edge must
contact the base
Description
Handle
Collar
Nylon washer
Metal pressing plate
Wooden pressing block
Spacing blocks
Half disc pressing plate
Threaded rod
Filter bag
Cage hoops
screws
Cage slats
Base plate
P3
Qty
1
1
1
1
1
2
2
1
1
2
48
24
1
P2