Table of Contents
Advertisement
High beams/
roadside parking lamps
1
Turn signals/roadside parking lamps
2
Switching on high beams
3
Switching off high beams/headlamp flasher
Roadside parking lamps, left or right*
The vehicle can be illuminated on one side for
parking. Comply with local regulations when
doing so.
Switching on
After parking the vehicle, press and hold the
lever up or down, arrow 1.
The roadside parking lamps drain the bat-
tery. Therefore, do not leave them on for
unduly long periods of time; otherwise, the bat-
tery might not have enough power to start the
engine.<
Switching off
Press the lever up or down to the pressure point.
80
Online Edition for Part no. 01 40 2 606 303 - © 10/10 BMW AG
Fog lamps*
Press the button to switch the lamps on and off.
*
Fog lamps*
The parking lamps or low beams must be
switched on for the fog lamps to operate. The
green indicator lamp lights up when the fog
lamps are switched on.
Depending on your vehicle's equipment, the fog
lamps are switched off when you activate the
headlamp flasher or switch on the high beams.
If the automatic headlamp control is acti-
vated, the low beams will come on auto-
matically when you switch on the fog
Guide fog lamps*
When the switch is in position 3, guide fog lamps
are switched on for a wider light distribution up
to a speed of 68 mph/110 km/h.
lamps.<
Advertisement
Chapters
Table of Contents
