Advertisement

Quick Links

USER MANUAL
Model:KD-WH150M
Thank you for choosing KIND
product, please read this user
manual
throughout
before
using.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KD-WH150M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kind KD-WH150M

  • Page 1 USER MANUAL Model:KD-WH150M Thank you for choosing KIND product, please read this user manual throughout before using.
  • Page 2 2. ALL brands and trademarks Are protected and other relative trademarks in this user manual are the property of their respective owners. 3. Due to constant effort of product development, KIND reserves the right to make changes and improvements to the product described in this manual without prior notice.
  • Page 3: Safety Precautions

    Safety Precautions Please follow the safety precautions before using . The following conditions are not covered by warranty. 1. Unauthorized repairs or other Unauthorized operations. 2. Inappropriate placement including but not limited to lighting, fire, exposure to rain, water or gas. 3.
  • Page 4: Product Introduction

    1. Product Introduction This model includes transmitter and receiver,adopts the latest encrypted transmission technology,Supports HDMI wirelessly transmitted in 150 meters scale(Line-of-sight), 1 channel HDMI digital video transmission, auto pairing. It is equipped with DC power connector, compact size, portable, and the receiving signal is very stable. 2.
  • Page 5: Appearance Instruction

    Remark: 1. The transmission distance may be different, and depend on surroundings, radio wave conditions, buildings, etc., the 150 meters transmission distance may be not guaranteed. 2. The wireless transmission might be interrupted if there’re other devices of 5Ghz wireless bandwidth used in the same location.
  • Page 6 ⑿ ON/ OFF:Power switch ⒀ DC in:Support DC 7~17V input,5.5mm(outer diameter)/2.1mm(inner diameter) Outside: negative, Inside: positive Device LED indicator Status Description Constant on Power connected and switched on Power Power disconnected and switched off Constant on There is recognizable video signal input Video Transmitter Flash...
  • Page 7: Setup Connection

    ⑷ Video:Video signal indicator ⑸ Power:Power status indicator。 ⑹ Pair:Pair button。 ⑺ Installation thread:1/4”-20 thread, Use the package supplied articulating arm trestle to install the device to the camera ⑻ USB:Micro USB,software upgrade interface ⑼ HDMI OUT:HDMI output (standard HDMI-A type connector). ⑽...
  • Page 8 Tips:1.When pairing, the transmitter and receiver need to be paired Simultaneously. 2.During normal use, ensure that the wireless device used has been paired and successfully paired. 3.The paired transmitter and receiver will be automatically connected after booting up. It is no need to pair again.
  • Page 9 ⑵ Set the receiver as high as possible to avoid interference.
  • Page 10: Troubleshooting

    ⑶ Avoid walls, trees and water to reduce signal attenuation. 7. Trouble shooting If the receiver failed to output video correctly, the possible causes are as below; please find the solution from following chart: The receiving Possible causes Soultion video The transmitter or the receiver is not Check power connection and switch on powered on...
  • Page 11: Specification

    8.Specification Model Transmitter Receiver Input HDMI×1 Output HDMI×1 HDMI×2 1080I(60∕59.94∕50)∕720P(60∕59.94∕50)∕1080P(60∕59.94∕50∕30 Video format ∕29.97∕25∕24∕23.98) Wireless FULL:5180-5220MHz and 5760-5820MHz frequency Modulation OFDM Support 16QAM、64QAM、QPSK、BPSK modulation mode mode Transmission 150m(Line of sight) distance Power ≤7.5W ≤7W consumption Input voltage DC∕Battery:7~17V DC∕Battery:7~17V Working Temperature:0℃~+40℃ environment Dimension 114.18×69.55×28(mm)...
  • Page 12 — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Beijing kind Network Technology Co. LTD Address: 16C, Unit 1, Building C, Yingdu PLAZA, No. 48, Zhichun Road, Haidian District, Beijing,China.

Table of Contents