Airlink101 ANAS250 User Manual page 20

Step 2 Enter the Utility
Choose your HOMENAS system and click to use the utility. Input the user name and
password. The default username and password are both "admin". If you forget the the
username and password you changed, you will need to reset HomeNas by pushing
and holding the reset button at the back panel for 10 seconds
Step 3 Mount the Home Nas
Click on Mount, you will be prompted for the Mount Disk screen. Enter the required
information to mount the Home Nas to your computer.
Disk Number: choose disk label you want.
Folder: choose the share folder you want to mount.
Password: You can set the password for extra security.
Step 4 Configure the Home Nas
Click on Management. You will see the following screen.
-20-