Samsung DV9 T Series User Manual page 194

Installation
22 English
U-PJT_DRYER_SimpleUX_WEB_SSEC-00_EU_English.indd 22
5. Remove the upper screw on the left of the door
frame, and then insert it in the corresponding right
hole of the door frame. Do not remove the lower
bracket screws.
6. Remove the 2 bracket screws on the right frame,
and then remove the 2 holder screws on the left
frame.
7. Insert the 2 removed bracket screws in the left
frame as shown.
- See the figure on the right for the correct
position of the screws.
8. Remove the bottom screw on the left frame, and
then insert it in the corresponding hole on the right
frame.
2021/11/9 17:26:28