Table of Contents
Advertisement
Quick Links
Industrial Ethernet
Managed Switches
Contents at a Glance:
Section 1
Section 2
Section 3
Section 4
Section 5
Section 6
Section 7
Applicable standards and certifications:
Total Quality
Hazardous Locations
This manual applies to the following products:
•
ET-5MS-#
•
ET-5MS-MDM-#
•
ET-9MS-#
•
ET-9MG-#
•
ET-10MG-#
•
ET-16MS-#
•
ET-18MG-#
Managed Switch Hardware Manual
• 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 •
SIXNET
General Information
LED Indicators
Installation / Mounting
Power Wiring
Communication Wiring
Technical Specifications
Service Information
Standard Locations
5-port managed Ethernet switch with 5 10/100 ports
5-port managed Ethernet switch with integrated telephone modem
9-port managed Ethernet switch with 9 10/100 ports
9-port managed Ethernet switch with 6 10/100 and 3 Gigabit ports
10-port managed Ethernet switch with 8 10/100 and 2 Gigabit ports
16-port managed Ethernet switch with 16 10/100 ports
18-port managed Ethernet switch with 16 10/100 and 2 Gigabit ports
European Directives
Page 1 of 18
mailto: support@sixnetswitch.com
Page 3
Page 4
Page 5
Page 10
Page 11
Page 13
Page 15
Marine & Offshore
US Emissions
Last Revised: 16-Nov-06
Advertisement
Table of Contents
Related Manuals for Sixnet EtherTRAK ET-5MS Series
Summary of Contents for Sixnet EtherTRAK ET-5MS Series
- Page 1 18-port managed Ethernet switch with 16 10/100 and 2 Gigabit ports Managed Switch Hardware Manual Page 1 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com...
- Page 2 This limited warranty is in lieu of all other warranties whether oral or written, expressed or implied. SIXNET's liability shall not exceed the price of the individual units, which are the basis of the claim. In no event shall SIXNET be liable for any loss of profits, loss of use of facilities or equipment, or other indirect, incidental or consequential damages.
-
Page 3: Operation
Do not connect a telephone line into one of the Ethernet RJ45 connectors. Managed Switch Hardware Manual Page 3 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com... -
Page 4: Led Indicators
Refer to the Software User Manual for details on the modem capabilities. Managed Switch Hardware Manual Page 4 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com... -
Page 5: Section 3 Installation
3. Unhook top of unit from din rail. 4. The unit is now removed. Managed Switch Hardware Manual Page 5 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com... - Page 6 Mechanical Dimensions for 9-Port 10/100 Models Managed Switch Hardware Manual Page 6 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com...
- Page 7 Mechanical Dimensions for 9-port Models with Gigabit Managed Switch Hardware Manual Page 7 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com...
- Page 8 Mechanical Dimensions for 5-Port 10/100 Models Managed Switch Hardware Manual Page 8 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com...
- Page 9 Mechanical Dimensions for 5-Port Model with Modem Managed Switch Hardware Manual Page 9 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com...
- Page 10 [0.76 cm] Mechanical Dimensions for 10-Port Models with Gigabit Managed Switch Hardware Manual Page 10 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com...
- Page 11 0.11" [0.25 cm] Mechanical Dimensions for 16-Port 10/100 Models Managed Switch Hardware Manual Page 11 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com...
- Page 12 0.11" [0.25 cm] Mechanical Dimensions for 18-Port Models with Gigabit Managed Switch Hardware Manual Page 12 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com...
-
Page 13: Power And I/O Wiring
When tightening the screws of the Managed Switch be careful to tighten to a max. of 3.48 lb-in. Managed Switch Hardware Manual Page 13 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com... -
Page 14: Communication Ports Wiring
The corresponding ACT/LNK LED will be ON solid when you have made a proper connection. 100BaseT Fiber Ports (SC Style) Managed Switch Hardware Manual Page 14 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com... - Page 15 Do not connect a telephone line into one of the Ethernet RJ45 connectors. Managed Switch Hardware Manual Page 15 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com...
-
Page 16: Technical Specifications
Contact your switch vendor for details. Managed Switch Hardware Manual Page 16 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com... - Page 17 FCC part 68; Industry Canada CS03-8; CTR21 (98/482/EC); ACA TS 001; ACA TS 002 Managed Switch Hardware Manual Page 17 of 18 Last Revised: 16-Nov-06 • 331 Ushers • Box 767 • Clifton Park, NY 12065 USA • +1 (518) 877-5173 • SIXNET mailto: support@sixnetswitch.com...
-
Page 18: Service Information
Section 7 Service Information We sincerely hope that you never experience a problem with any SIXNET product. If you do need Service service, call SIXNET at (518) 877-5173 and ask for Applications Engineering. A trained specialist Information will help you to quickly determine the source of the problem. Many problems are easily resolved with a single phone call.
Need help?
Do you have a question about the EtherTRAK ET-5MS Series and is the answer not in the manual?
Questions and answers