Page 1
ASSEMBLY INSTRUCTIONS Our packing box doubles as an assembly workbench...
Page 2
Semi-finished *1pc Base leg*5pcs Headrest*1pc Gas lift *1pc Wheel*5pcs Armrest *2pcs Screw*6pcs Gasket*6pcs Chair Base *1pc M6X35MM M6X14X1.2MM Wrench *1pc Headrest knob*1pc...
Page 3
Warehouse@jddtech.net Attach base legs(B)to chair base(I) Insert 5 wheels(F)into the slot of the base leg(B) Install gas lift(D)ito the five star base(B) Attach the armrests(M)to the Seat(A)with the 6 screws M6*35(E)and the 6 gaskets M6*14*1.2(L)
Page 4
Place the Seat(A) on the gas lift(D) Lift the chair's backrest, and lock the back when clicked. Fix the headrest(G) on the backrest. Check the chair to make sure all parts and screws are securely tightened Chair Assembled...
Page 5
Function Introduction Headrest adjustment: Adjust the height and angle of the headrest Lumbar support adjustment: Up and down adjustment 60MM The armrest can be adjusted up & down, front & back, in & out as per your sitting posture. The angle can also be adjusted.
Page 6
Standing behind the chair, press the button with both hands to fold the backrest Pull out the footrest/leg rest, flip the pedal Flip the pedals to their original position and push the footrest/leg rest...
Need help?
Do you have a question about the 40836584276037 and is the answer not in the manual?
Questions and answers