High-Temperature Warning - Jackery Explorer 100 Plus User Manual

Battery Power Indicator
When the product is being charged, the orange circle around the battery
percentage will light up in sequence. When charging other devices, the
orange circle will stay on.
Low Battery Indicator
When the battery is less than 20%, the Low Battery Indicator will stay on.
When less than 5%, the Low Battery Indicator will flash. When it is being
charged, the Indicator will be o .
Always-on Display Mode
After the display screen lights up, double-click the DISPLAY Button and
the mode of Always-on display will be on, then press it again to turn o
the screen.
Energy Saving Mode
The Energy Saving Mode is disabled by default. When the Energy Saving
Mode is enabled, this occurs if the product is not connected to any
device or the USB output power is less than or equal to 2W, the product
will automatically turn o all outputs after 12 hours.
To turn on the Energy Saving Mode
Long press the DISPLAY Button until the Energy Saving Mode icon lights up on the
screen. Switching on the Energy Saving Mode enables the product to continuously
charge devices less than or equal to 2W.
To turn o the Energy Saving Mode
Long press the Display Button until the Energy Saving Mode icon disappears.
Fault code
In order to respond to the feedback quickly, we set up common fault
codes F1, F2, F3 in the system: If any codes appear, please remove the
load or unplug the charging plug, the product can restore by itself, if not,
please contact after-sales service.

High-temperature warning

If it appears on the screen, do not worry, the battery will restore
automatically after cooling.
Low-temperature Warning
If it is displayed on the screen, do not worry. It will automatically restore
after the ambient temperature is restored.
US
03