Setting/Querying Can Information; Set/Query Module Conversion Method - Ebyte ECAN-101 Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
[Example]
Settings:
Sending: AT+UART=115200,8,1, EVEN, NFC/r/n
Response:<CR><LF>+OK<CR><LF>
Query:
Send: AT+UART/ R/n
Response:<CR><LF>+OK<CR><LF>AT+UART=115200,8,1, EVEN, NFC<CR><LF>

6.7 Setting/querying CAN information

instructions
function
set up
return
query
parameter
[Example]
Settings:
Sending: AT+CAN=100,70, NDTF/r/n
Response:<CR><LF>+OK<CR><LF>
Query:
Send: AT+CAN/ R/n
Response:<CR><LF>+OK<CR><LF>AT+CAN=100,70, NDTF<CR><LF>

6.8 Set/Query Module Conversion Method

instructions
function
set up
return
query
parameter
[Example]
Settings:
Send: AT+CANLT=ETF/r/n
Response:<CR><LF>+OK<CR><LF>
Query:
Send: AT+CANLT/ R/n
Response:<CR><LF>+OK<CR><LF>AT+CANLT=ETF<CR><LF>
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology Co., Ltd.
Flowcontrol:
NFC (no flow control), FC (flow control),
CAN
Set CAN interface communication parameters
AT+CAN=baud, id, mode<CR><LF>
<CR><LF>+OK<CR><LF>
AT+CAN?
Baud (CAN Baud Rate): 6K, 10K,
250K, 400K, 500K, 600K, 750K, 1000K Unit: bps
ID (frame ID): 0-7FF (standard frame), 0-1FFFFFFFFF (extended frame)
Mode: (frame category): NDTF (standard frame), EDTF (extended frame)
MODE
Set/Query Module Conversion Method
AT+MODE=mode<CR><LF>
<CR><LF>+OK<CR><LF>
AT+MODE?
Mode: TRANS (transparent), TPRTL (transparent
PROTOL (protocol mode), USER (custom protocol), MODBUS (MODBUS),
ECAN-101 User Manual
20K, 50K, 100K, 120K, 125K, 150K, 200K,
tape identification),