Table of Contents
Advertisement
Quick Links
___________________________________________________________________________________
PCI Express Powered USB Card
Copyright© 2014 SUNIX Co., Ltd. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language,
or transmitted in any from or by any means, photocopying, manual, or otherwise, without prior written permission from
SUNIX.
SUNIX shall not be liable for any incidental or consequential damages resulting from the performance or use of this
SUNIX makes no representations or warranties regarding the contents of this manual. Information in this manual has
been carefully checked for reliability; however, no guarantee is given as to the correctness of this content. In the
interest of continued product improvement, this company reserves the right to revise the manual or include change in
the specifications of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for general use by the
customers.
All other trademarks or registered marks in this manual belong to their respective owners.
1.
Keep this User's Manual for future reference.
2.
Always read the safety information carefully.
3.
Keep this equipment away from direct sunlight, or in humid or damp places.
4.
Do not place this equipment in an unstable position, or on vibrating surface before setting it up.
5.
Do not use or place this equipment near magnetic fields, televisions, or radios to avoid electronic
interface that affects device performance.
User's Manual
Copyright
Disclaimer
equipment.
Trademarks
SUNIX is a registered trademark of SUNIX Group.
Safety Information
1
Advertisement
Table of Contents
Related Manuals for Sunix PC104
Summary of Contents for Sunix PC104
- Page 1 SUNIX. Disclaimer SUNIX shall not be liable for any incidental or consequential damages resulting from the performance or use of this equipment. SUNIX makes no representations or warranties regarding the contents of this manual. Information in this manual has been carefully checked for reliability;...
- Page 2 ___________________________________________________________________________________ Regulatory Compliance FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This equipment may not cause harmful interference (2) This equipment must accept any interference received, including interference that may cause undesired operation.
-
Page 3: Table Of Contents
___________________________________________________________________________________ Table of Contents Chapter 1 Introduction 1.1 Overview ..........................5 1.2 Package Checklist ....................... 6 1.3 Product Features ......................... 6 1.4 Product Specifications ......................7 Chapter 2 Hardware Installation 2.1 Hardware Installation ......................10 2.2 Product Configuration Options ..................12 2.3 Pin Assignments ........................ -
Page 4: Chapter 1 Introduction
___________________________________________________________________________________ Introduction ______________________________________________ Thank you for purchasing SUNIX Powered USB PCI Express Card, which is designed to enable users accessing USB devices without additional external power supply connection. Powered USB provides the necessary power as well as the communication signals over a hot pluggable cable. SUNIX Powered... -
Page 5: Overview
3 Powered USB 2.0 ports to a PC. Devices which require more power than provided by the regular USB interface can be easily installed and used with no need for an additional power supply. SUNIX Powered USB PCI Express Add-On card, carrying the latest power switching technology provides +12V and +24VDC, through the PC power supply directly to its 3 Powered USB ports. -
Page 6: Package Checklist
___________________________________________________________________________________ 1.2 Package Checklist Please check if the following items are present and in good condition upon opening your package. Contact your vendor if any item is damaged or missing. 1. Powered USB PCI Express Card 2. User's Manual (This document) 1.3 Product Features ... -
Page 7: Product Specifications
___________________________________________________________________________________ 1.4 Product Specifications Hardware PCI Express Spec 1.1, Single-Lane (x1) Controller PCI Express USB3.0 Host controller, ASM3042 Enhanced Host Controller Interface (EHCI) and USB Standard Open Host Controller Interface (OHCI) IRQ & IO Assigned by System Serial Communication Interface Universal Serial Bus 2.0 High-Speed (HS), Full-Speed(FS) and Low-Speed(LS) Speed... - Page 8 ___________________________________________________________________________________ Microsoft Client Windows 10 (x86/x64)/ 11 Microsoft Server 2012 R2 /2016 /2019 (x86/x64) and above Linux Linux 2.6 and above Environment Operation Temperature 0 to 60°C (32 to 140°F) Operation Humidity 5 to 95% RH Storage Temperature -20 to 70°C (-4 to 158°F) Standards and Certifications CE, FCC, VCCI, BSMI Green...
-
Page 9: Chapter 2 Hardware Installation
___________________________________________________________________________________ Hardware Installation ______________________________________________ This chapter includes information about hardware installation for PCI Express Powered USB PCI Express Card. The following topics are covered: 2.1 Hardware Installation 2.2 Product Configuration Options 2.3 Pin Assignments... - Page 10 ___________________________________________________________________________________ 2.1 Hardware Installation Follow the instruction given below to install the Powered USB PCI Express Card. Turn your computer off Remove the power plug from the plug socket. Remove the cover from the computer case. If fitted. Remove the metal cover plate on the rear of a free PCIe slot. Insert USB 2.0 PCI Express Card into the free PCI Express slot and screw it firmly on the bracket side.
- Page 11 ___________________________________________________________________________________ SAFETY FIRST 1. To avoid damaging, make sure to disconnect power connection before wiring or disposing the Powered USB card. 2. In order to output enough power to your device, we strongly recommend using 400W or above power supply in your system. 3.
-
Page 12: Product Configuration Options
___________________________________________________________________________________ 2.2 Product Configuration Options SUNIX provides several models with different power voltage output for customer options. PUB1200X +24VDC / 1-port / Maximum 3A each port PUB1200XL (Low Profile) +12VDC / 2-port / Maximum 3A each port PUB0300XL (Low Profile) -
Page 13: Pin Assignments
___________________________________________________________________________________ 2.3 Pin Assignments The Powered USB connectors are a standard USB “A” type connector with 4 extra pins designed to supply higher voltages. In order to differentiate varieties of power voltage level, Powered USB connector built-in different connect-key with different color coding to allow the correct voltage cable connection. +12VDC Voltage Keyed +5VDC Voltage Keyed +24VDC Voltage Keyed... - Page 14 ___________________________________________________________________________________ SUNIX Powered USB card has one right-angle internal PCIe GFX power connector that sources from power supply. Here is the Pin Definition of PCIe GFX power connector. Pin No. Signal Name Description +12VDC +12V +12VDC or not connected +12VDC...
-
Page 15: Chapter 3 Driver Installation
___________________________________________________________________________________ Driver Installation ______________________________________________ After Powered USB card hardware installs properly in your system, the first thing you should do is that check operation system detect the card or not. This chapter introduces the method to confirm the Powered USB card installation. The following topics covered in this chapter: 3.1 Driver Installation ... - Page 16 ___________________________________________________________________________________ 3.1 Driver Installation Powered USB PCI Express Card will be installed automatically with system USB in-box driver. Please check click on the “Device Manager” tab in System Properties, which you access from the Windows Control Panel. You should see an entry for the driver you installed under the Universal Serial Bus Controllers item.
-
Page 17: Powered Usb Card Operation
___________________________________________________________________________________ 3.2 Powered USB Card Operation User can plug standard USB Type A male or Powered USB male cable into the Powered USB connector on board. Standard USB Type A Male Powered USB Male Type Please press the key on the Powered USB male connector, then you can eject the cable from the card. -
Page 18: Chapter 4 Troubleshooting
___________________________________________________________________________________ Troubleshooting ______________________________________________ This chapter shows some problems that user came with usually. Also you can check it if the Powered USB Card can not work properly in your system after following hardware and software installation steps. 4.1 Troubleshooting ... - Page 19 ___________________________________________________________________________________ 4.1 Troubleshooting 1. If the card and devices connected to the computer do not seem to be working properly, please perform following basic troubleshooting steps: 1. Check that all cables are correct and securely connected. 2. Make sure the devices are turned on. 3.
- Page 20 ___________________________________________________________________________________ 5. Is it possible to connect a USB2.0 hub to the Powered USB PCI Express Card? Yes. You will then be able to connect a number of devices (max. 127) to one USB port. 6. Why not I can get enough power current to my Powered USB device? Our Powered USB card PCB design can tolerence up to 3Amp power current per port, so please use sufficient 400W or above power supply.
-
Page 21: Chapter 5 Appendix
5.1 Contact Information Customer satisfaction is our number one concern, and to ensure that customers receive the full benefit of our products, SUNIX services has been set up to provide technical support, driver updates, product information, and user’s manual updates.
Need help?
Do you have a question about the PC104 and is the answer not in the manual?
Questions and answers