Pioneer CT-1060W Service Manual page 70

CT-1060W/HEM,HB,HP, D,CT-S77W/D/G
13. SUPPLEMENT FOR HEM, HB, HP, D AND D/G TYPES
The HEM, HB, HP, D and D/G types are the same as the KU type with the exception of following
sections.
Part No.
KU type HB type
Symbol! & Description
T1 Power transformer (120V) RTT-421
(220V/240V)
(110V/220V/240V) RTT-424 RTT-424
FU301, FU302 Fuse (800mA) REK-079 REK-079
Fuse (TS500mA)
FU303 Fuse (1.25A)
Fuse (T1.25A)
$1 Line voltage selector RSX-057 RSX-057
AC power cord RDG-048 RDG-053 RDG-052 RDG-040 RDG-058 RDG-058
Strain relief (for AC power cord) REC-395 REC-396 REC-396 REC-396 REC-395 REC-395
Packing case (CT-S77W [BK]) RHG-846 RHG-848
Packing case (CT-1060WIBK]) " RHG-844 RHG-844
Packing case (CT-1060W) - RHG-845 RHG-845
Operating instructions (English) RRB-263 RRB-263
(English/German/French/Italian)
(Spanish — auxiliary) RRD-081
Line Voltage Selection for HEM, HP and HB Types
1. Disconnect the AC power cord.
2. Remove the bonnet case.
3. Change the connection of the power transformer
primary lead wires as follows:
220V: Connect the gray lead wire to the
J15-3 terminal on the power supply
unit, and connect the red lead wire
to the J15-2 terminal.
240V: Connect the gray lead wire to the
J15-2 terminal on the power supply
unit, and connect the red wire to
the J15-3 terminal.
4, Stick the line voltage label on the rear panel.
Description | Part No.
220V label | AAX-193
240V label | AAX-192
90