Print Character Соое; Reset User Programmable Functions - Panasonic KX-F50 Operating Instructions Manual

РНІМТЕН ТЕ5Т
If you һауе any trouble with the print
quality of your unit, check it using this
feature.
Operation:
1 * Press the PROGRAM button.
The PROGRAM indicator lights.
2 Press "Ж", then press "42".
3 Press the START/COPY button.
The unit prints the pattern as shown in
Figure 1.
If the print pattern has any blurred
points or lines or dirty pattern, consult
with your servicenter.
4 Press the PROGRAM button to end
the operation.
The PROGRAM indicator goes out.
БЕЛЕ ` RE 2o POE Cose »
E 9,
a, f
:
e
7 "o
а . 9 ХЕ m f Ж
ne
> c7
EI
ж
Q n
&
»
Figure 1
PRINT CHARACTER CODE
You can print the character code list for fax
LOGO setting.
Operation:
1 Pressthe PROGRAM button.
The PROGRAM indicator lights.
2 Press "%", then press "43".
43 Press the START/COPY button.
The unit starts printing.
4 Press the PROGRAM button to end
the operation.
The PROGRAM indicator goes out.
RESET USER
PROGRAMMABLE
FUNCTIONS
This operation enables you to return the
user programmable functions of
05 through 33 to their initial default
settings. The function number 02 (Your
LOGO setting) and 04 (Your TELEPHONE
NUMBER setting) will not be erased.
Operation:
1 Pressthe PROGRAM button.
The PROGRAM indicator lights.
2 Press "Ж", then press "50".
З Press the START/COPY button.
The following message is printed.
USER PROGRAMMABLE
FUNCTIONS RESET OK?
YES: PRESS "START/COPY"
NO: PRESS "STOP/CLEAR"
4 Press the START/COPY button to
return to initial settings.
The following message will be printed.
USER PROGRAMMABLE
FUNCTIONS RESET COMPLETED!
OR
Press the STOP/CLEAR button to
cancel.
5b Press the PROGRAM button to end
the operation.
The PROGRAM indicator goes out.