Bluetooth Pairing - Targus ECOSMART AKB873 User Manual

Targus EcoSmart™ Fullsize Wireless Keyboard

Bluetooth pairing

Power switch
LED for Power/
Bluetooth Pairing/
2.4G Pairing
1. Turn on the keyboard by sliding the power button to the ON position. The 3
wireless channel LEDs
begin flashing for up to 3 minutes as the keyboard automatically attempts to pair
the 1st Bluetooth channel to your device.
2. Switch ON the Bluetooth function of your device and turn on Bluetooth search
mode.
3. Select "EcoSmart Keyboard" in the bluetooth menu on your device.
4. Pairing will start automatically. Once the Targus EcoSmart Keyboard is connected
to your device the LED will stop flashing.
5. To pair an additional device or replace a paired device, press and hold one of
the two Bluetooth channel keys for 5 seconds to enter Bluetooth pairing mode.
6. Press the Bluetooth channel keys
multiple devices have been paired.
will be lit for 3 seconds and then one will
to switch between devices once
4
Targus EcoSmart™ Fullsize Wireless Keyboard
Establishing the Connection of 2.4GHz Wireless
(A) Remove the USB receiver from the keyboard.
(B) Plug the USB A receiver into an available USB A port on your computer.
(C) Short press the key to enter 2.4G mode, then the white LED indictor will
light up and pair automatically.
5