Table of Contents
Summary of Contents for ISE 3-0002-005
- Page 1 Product Manual KNX RF Multi/TP media coupler or RF repeater 3-0002-005 Documentation valid for: Product database entry: v1.2 Firmware: v1.15 Documentation issued: 06.11.2023 © 2023 ise Individuelle Software und Elektronik GmbH...
- Page 2 © Copyright 2023 ise Individuelle Software und Elektronik GmbH All rights reserved. No part of this document may be edited, copied, disseminated or made public in any form (print, photocopy or any other method) without the prior written permission of ise Individuelle Soft- ware und Elektronik GmbH.
-
Page 3: Table Of Contents
Firmware and hardware ....................37 12.4.4 Transfer to a third party..................... 37 12.4.5 Renting out, leasing out and sub-licensing ..............37 12.4.6 Software creation ......................37 KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH... - Page 4 Applicable law........................38 12.10 Termination ........................38 12.11 Subsidiary agreements and changes to the agreement ..........39 12.12 Exception..........................39 Open Source Software....................40 KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH...
-
Page 5: About This Documentation
PC button <<Inscription>> Text on software interface Troubleshooting tip Important additional information Table 2: Special symbols and typographical conventions KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 3 / 40... - Page 6 Backbone coupler Line coupler Segment coupler RF-USB interface TP-USB interface RF repeater RF button Dimmer Table 3: Graphic symbols KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 4 / 40...
-
Page 7: About Knx Rf Multi/Tp Media Coupler Or Rf Repeater
The KNX RF Multi/TP media coupler or RF repeater is a KNX system device and complies with the KNX guidelines. Important ise Individuelle Software und Elektronik GmbH assumes no liability for damage caused by improper use or use for purposes other than or contrary to the intended purpose. Configuration: compatible ETS version Simple integration into the KNX system (completely programmable via ETS): •... -
Page 8: How It Works
In repeater mode, power is supplied via the TP line or a suitable external DC power supply unit. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 6 / 40... - Page 9 You can obtain functional enhancements for the KNX RF Multi/TP media coupler or RF repeater with a new version of the firmware. The firmware can be installed via TP or RF. Simply download the latest firm- ware and the relevant product manual from our website www.ise.de. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 ©...
-
Page 10: Important Notes
• Send the device back to us postage free with a detailed error description only if our support team asks you to. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 8 / 40... -
Page 11: Technical Data
Power supply unit (not included in scope of supply) Secondary rated voltage DC 24 V Secondary rated current max. 0.3 A KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 9 / 40... -
Page 12: Device Design
Data on device sticker (front) Description Product name KNX certification Index status Order number Figure 3: Device sticker front KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 10 / 40... -
Page 13: Data On Device Sticker (Back)
Batch number WEEE symbol Figure 4: Device sticker back KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 11 / 40... -
Page 14: Installation
The same stickers are attached to the side of the device. The installation instructions are part of the product. Give these instructions to your customer. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 12 / 40... -
Page 15: Checking The Installation Conditions
9. If you use a separate DC power supply, install the repeater within radio range of the media coupler. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 13 / 40... -
Page 16: Connecting The Device
This could cause the KNX RF Multi/TP media coupler or RF repeater to heat up to impermissi- ble levels. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 14 / 40... - Page 17 Insert the device into the socket. Stretch the antenna out as far as possible, or wind in a circle behind the device. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 15 / 40...
-
Page 18: Commissioning And Configuration
Telegram forwarding between TP and RF (off)...(yellow)...(off)... (Only in media coupler mode) Brief flashing Table 4: Device status based on priority KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 16 / 40... -
Page 19: Configuration
Parametrisation, p. 27. The KNX RF Multi/TP media coupler or RF repeater is now ready for commissioning using << Program ETS>>. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 17 / 40... -
Page 20: Creating The Device In The Ets
Follow the further instructions in the ETS. If necessary, call up the Online Help with the [F1] button. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 18 / 40... - Page 21 Select the newly added device and delete it again from your topology. Figure 6: Updating the application program KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 19 / 40...
-
Page 22: Data Interface Configuration
RF line. Figure 7: Coupling two RF lines via one TP line KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 20 / 40... -
Page 23: Selecting The Operation Mode
Figure 8: Select operation mode ETS6 product database entry Select the desired use in the catalogue: Figure 9: Select application KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 21 / 40... -
Page 24: Programming An Individual Address
The RF backbone and subordinate RF lines have the same domain address. Figure 10: Use as a backbone coupler KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 22 / 40... - Page 25 • A KNX RF line can contain up to 255 RF devices. Figure 11: Use as a line coupler KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 23 / 40...
- Page 26 The KNX RF Multi/TP media coupler or RF repeater is connected to a TP line. Figure 12: Use as a segment coupler KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 24 / 40...
- Page 27 Figure 13: Use as an RF repeater with TP connection KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 25 / 40...
-
Page 28: Update Firmware
So that you can use the new functions, it is necessary for the versions of the firmware being used and the product database entry are compatible. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 26 / 40... -
Page 29: Parametrisation
Click on the desired parameter. The corresponding explanation appears in the lower area of the parameter dialogue. Figure 15: ETS context help KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 27 / 40... - Page 30 In the ETS6 product database entry, the filter setting is configured automatically using the linked group addresses. The filter table can be subsequently edited in both ETS5 and ETS6. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 28 / 40...
-
Page 31: Troubleshooting
The status LED will flash quickly 5 times. The device is reset to the factory settings. You do not have to restart the device. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 29 / 40... -
Page 32: Contacting Support
• To identify the device: Product name or order number • Version of the firmware • ETS version • Clear error description KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 30 / 40... -
Page 33: Disassembly And Disposal
• Cover up live parts in the vicinity. Disconnect the device from the socket. Remove the bus connection terminal from the device. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 31 / 40... - Page 34 Contact your local authority for recycling details. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 32 / 40...
-
Page 35: Glossary
Main segment Every line has a main segment. This main segment can be subdivided into several sub-segments by segment couplers. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 33 / 40... - Page 36 ETS. The product database entry is provided in the form of a file by the device manufacturer. The latest version of product database entries from ise Individuelle Software und Elektronik GmbH can be downloaded free of charge from our website www.ise.de.
- Page 37 Updates You will find information on new versions of the firmware in this documentation under the search term "Update". KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 35 / 40...
-
Page 38: Licence Agreement Knx Rf Multi/Tp Media Coupler Or Rf Repeater
On accepting this agreement and installing the KNX RF Multi/TP media coupler or RF repeater software or putting the KNX RF Multi/TP media coupler or RF repeater into use, you conclude an agreement with ise Individuelle Software und Elektronik GmbH and agree to abide by the terms in this agreement. 12.1 Definitions Licensor: ise Individuelle Software und Elektronik GmbH, Oldenburg (Oldb), Osterstraße 15, Germany... -
Page 39: Firmware And Hardware
The KNX RF Multi/TP media coupler or RF repeater software and the documentation (which shall be pro- vided in printed format or additionally as online help or online documentation) shall be subject to possi- ble changes by the licensor. You will find the latest software and documentation versions at www.ise.de. 12.7 Warranty The KNX RF Multi/TP media coupler or RF repeater software works together with software from third ►... -
Page 40: Software And Documentation
The commissioning and visualisation software must be uninstalled and all copies must be destroyed or returned to the licensor. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 38 / 40... -
Page 41: Subsidiary Agreements And Changes To The Agreement
Subsidiary agreements and changes to the agreement shall only be valid in writing. 12.12 Exception All rights not expressly mentioned in this agreement are reserved. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 39 / 40... -
Page 42: Open Source Software
This offer is valid for 3 years after the service for this product has been discontinued. KNX RF Multi/TP media coupler or RF repeater 3-0002-005 © 2023 ise Individuelle Software und Elektronik GmbH p. 40 / 40... - Page 43 Individuelle Software und Elektronik GmbH Osterstraße 15 26122 Oldenburg, Deutschland Phone: +49 441 680 06-11 Fax: +49 441 680 06-15 E-mail: sales@ise.de www.ise.de...
Need help?
Do you have a question about the 3-0002-005 and is the answer not in the manual?
Questions and answers