Table of Contents
Advertisement
Inserting the Button-Type Battery
1 Pull out the Battery Holder while
pushing the Stopper @.
2 Insert the battery with the stamped (+)
mark facing downward as shown in the
illustration.
3 Insert the Battery Holder into the
Remote Controller.
@ Replacing the Button-Type Battery
The life of the battery is about 1 year.
When the battery is exhausted, purchase a new
CR2025 battery and insert it in the same way as
explained above.
@ CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the equipment manufacturer. Discard
used batteries according to manufacturer's instructions.
Advertisement
Table of Contents
