Advertisement
The electrical connections
WARNING: THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should this
safety measure not be observed.
if the plug that is fitted to your appliance is not suita-
ble for your socket outlet, it must be cut off and the
appropriate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent
the hazard of shocks in case it should be plugged into
a 13amp socket in another part of your home.
Important
The wires in the mains lead are coloured in accord-
ance with the following code:
Green and Yellow
- Earth
Blue
- Neutral
Brown
- Live
If you fit your own plug, the colours of the wires in the
mains lead of your appliance may not correspond with
the markings identifying the terminals in your plug,
proceed as follows:
GREEN & YELLOW
13 AMP FUSE
Connect the Green and Yellow (earth) wire to the ter-
minal in the plug which is marked with the letter «E» or
the earth symbol ©, or coloured green and yellow.
Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter «N» or coloured
black.
Connect the brown (live) wire to the terminal in the
plug which is marked with the letter «L» or coloured
red.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured in-
sert at the base of the plug.
A replacement cover/carrier must be obtained from
your local Zanussi Service Force Centre whose ad-
dress is listed in the Customer Care Booklet which ac-
companies your instruction manual.
- 73/23 of 19.2.73 (Low Voltage Directive) and sub-
sequent modifications;
- 89/336 of 3.5.89 (Electormagnetic Compatibility
Directive) and subsequent modifications.
Please ensure that when the appliance is installed
j itis easily accessible for the engineer in the event
of a breakdown.
Advertisement
