And Functions - Hitachi VT-498EM Instruction Manual

11.
. OPERATE SWITCH
Turn system power on and off.
. CASSETTE COMPARTMENT
. COLOUR MODE INDICATORS
MODE INDICATORS
¢ "[PLAY]" appears during the playback mode.
¢ "TREC ]" appears during the record mode.
DIGITAL TIMER DISPLAY
This normally shows the time and day of the week.
. CHANNEL INDICATOR DISPLAY
This shows the channel number corresponding to the
channel selected.
REWIND/VISUAL SEARCH BUTTON
Press to start rewind.
Press this button during playback and reverse playback
picture at high speed can be seen.
. PLAY BUTTON
10.
Press this button during playback and forward playback
picture at high speed can be seen.
STOP BUTTON
The STOP button must be pressed between "RECORD"
and any other operation.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
17 18 19
PAUSE BUTTON
Press to pause during recording.
EJECT BUTTON
Press to remove cassette.
COUNTER RESET BUTTON
To reset counter to '0000'.
MEMORY BUTTON
Note: Press the button again to switch off the "M" in-
dicator.
CHANNEL SELECT BUTTONS
ing these buttons.
the VIDEO IN/AUDIO IN jacks.
RECORD BUTTON
Press RECORD button to record.
Timer will switch the VTR off automatically at a pre-
selected time. This is convenient when you go out dur-
ing recording.
PICTURE CONTROL
Adjust the picture so it is easy to see.
TRACKING CONTROL
To minimize noise in playback.
. COLOUR SYSTEM AUTO/MANUAL SELECT
SWITCH
This switch is used to select colour systems either auto-
matically or manually.
AUTO: Set to this position ordinarily. Circuits are auto-
matically switched to either PAL, MESECAM/
SECAM or NTSC.