Martin Audio DX0.6 User Manual page 24

2. If EQ is off, you need to switch it on. For details, see
Enable input EQ (page
You can only switch on EQ bands if
EQ is on.
3. Rotate PM1 until the appropriate EQ band (PEQ-01 to
PEQ-10 ) appears at the top right of the screen and
press PM1.
For example, to select the tenth band of EQ, rotate
PM1 until PEQ-10 appears top right and press PM1.
4. To switch this EQ band on or off, rotate PM1 until E/N
is shown bottom left. Then rotate PM2 left to select
OFF or right to select ON.
You can only edit the type,
frequency, gain, Q and slope if the
EQ band is switched on.
5. To select the Type, rotate PM1 until E/N is shown
bottom left and Type bottom right. Make sure E/N is
ON and then rotate PM3 to choose the type.
For a list of the types available, see the table below.
6. To update the frequency, make sure E/N is ON and
rotate PM1 until Frequency is shown bottom left.
To change the frequency in steps of 100Hz, rotate
PM2.
To change the frequency in steps of 1Hz, rotate PM3.
The minimum value is 20Hz and the maximum
depends on the type.
7. To update the gain, make sure E/N is ON and rotate
PM1 until Gain is shown bottom left.
To move the gain up or down by 0.1dB rotate PM2
(between -15dB to +15dB).
You can only edit gain for some EQ
types.
8. To update Q, make sure E/N is ON and rotate PM1
until Gain is shown bottom left and Q bottom right.
Then rotate PM3 to change the Q value.
24
23).
You can only edit Q for some EQ
types.
9. To update slope (S), make sure E/N is ON and rotate
PM1 until Gain is shown bottom left and S bottom
right. Then rotate PM3 to change the slope value.
You can only edit slope for some EQ
types.
10. When you've finished editing, press PM2 to return to
the menu. To see what you can do next, see
channels (page 21) step 5.
EQ types
Name on Description
screen
BELL Bell (constant Q). This is the default.
HiShvS High shelf with preset slope
HiShvQ High shelf with variable Q
LoShvS Low shelf with preset slope
LoShvQ Low shelf with variable Q
LP 1st Low pass first order (classic 6dB/Oct)
LP 2nd Low pass second order (classic 6dB/Oct)
LP Q Low pass with variable Q (classic 6dB/Oct)
HP 1st High pass first order (classic 12dB/Oct)
HP 2nd High pass second order (classic 12dB/Oct)
HP Q High pass with variable Q (classic 12dB/Oct)
Notch Notch
AllPs1 All pass first order
AllPs2 All pass second order
DX0.6 User Guide
Input