Advertisement
Quick Links
Advertisement
Summary of Contents for Fox Electronics GR2015-R
- Page 1 FOX GR2015-R AC220-240V 50-60Hz 2000W Sigurnosno uputstvo...
- Page 2 220-...
- Page 3 samo...
- Page 4 (ZA PTC-2280Y) ” ”...
- Page 5 ” ” " – " " " " " " " "22 "...
- Page 7 USER MANUAL PTC HEATER FOX GR2015-R AC220-240V 50-60Hz 2000W PLEASE SAVE THESE INSTRUCTIONS WARNING: READ THIS OWNER’S MANUAL CAREFULLY BEFORE USE.
- Page 8 Safety instruc�on Read ALL instruc�ons before using this unit. 1. CAUTION: Risk of Electric Shock. DO NOT open or try to repair the heater yourself. 2. This heater may get hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces.
- Page 9 18. DO NOT use outdoors. 19. WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with any solid-state speed control device. 20. DO NOT a�empt to repair or adjust any electrical or mechanical func�ons on this unit. Doing so will void your warranty.
- Page 10 PRODUCT STRUCTURE(FOR PTC-2280Y) Remote control Control Panel Display panel OPERATION INSTRUCTION 1) Plug the power cord into the power socket, the machine enters the standby state, press the “ ” bu�on, the whole machine starts to work, there is hot air(low hea�ng mode) to send out, and the corresponding indicator light is on, , press “...
-
Page 11: Installation
bu�on con�nuously. The machine works at the "low heat - high heat - cold wind" cycle, and the corresponding indicator light is on or off. 3) When the machine is in working state, press the " " bu�on, the machine is in the �ming se�ng, each �me it is pressed, it will increase by 1 hour, up to 15 hours, and the corresponding indicator will light up. -
Page 12: Storage And Maintenance
Note: When moun�ng the chassis, please stand the machine upside down on the packaging foam or other so� surface to avoid scratching the product surface. STORAGE AND MAINTENANCE 1. Turn off the power and unplug the power before cleaning. 2. A�er the product is completely cooled, wipe the outer surface with a so� cloth, and use a so� brush to clean the ven�la�on holes.
Need help?
Do you have a question about the GR2015-R and is the answer not in the manual?
Questions and answers