Download Print this page

Sealey AFPL3 Instructions page 2

4-way trade aluminium adjustable height telescopic ladder en 131

Advertisement

2.
INTRODUCTION
EN 131 Certified 4-way, 4-section, aluminium ladder. Can be used as a straight ladder, step ladder, offset ladder and extension ladder.
Fitted with two robust auto-latching locking hinges for multi-positioning. Features extendable legs providing increased climbing height.
3.
SPECIFICATION
Model No: ............................................................AFPL3
Extension Ladder Height Min/Max: .......... 2720/4550mm
Folded Depth: ..................................................... 190mm
Folded Height: ................................................... 1405mm
Maximum Capacity: ............................................... 150kg
4.
OPERATION
WARNING! Ensure all hinges and locks are fully engaged into their locking positions before using the ladder.
4.1.
STRAIGHT / EXTENSION LADDER
IMPORTANT: Always position the ladder at an angle of between 65° and 75° to the ground (see safety instructions above).
4.1.1. Fold out the two sections of the ladder until the sprung hinge locks lock into their first position (step ladder), push in the two hinge locks
(Fig.1) and carry on folding out the two sections of the ladder until it is aligned straight and ensure the hinge locks lock out into their
second position.
4.1.2. To extend the ladder, pull the spring loaded locking arms outward (Fig.2) and adjust the ladder length as required. Ensure the locking
arms lock into position.
4.1.3. Carefully manoeuvre the ladder into place, ensuring the correct angle and positioning for maximum stability.
4.2.
STEP LADDER
4.2.1. Fold out the two sections of the ladder until the sprung hinge locks lock into their first position (the two sections are approx. 45° apart).
4.2.2. If required, extend one side of the ladder at a time by pulling the spring loaded locking arms outward (Fig.2) and adjust the ladder
length as required. Ensure the locking arms lock into position and that both sides are extended equally.
4.3.
OFFSET LADDER
4.3.1. Set up the ladder as a step ladder first, but then extend one side of the ladder by one or two rungs more than the other side, depending
on the height of the steps that the ladder will be placed on.
4.3.2. The shorter side of the ladder MUST always be placed on the step, and the longer side placed on the ground.
FIG.1
5.
MAINTENANCE
5.1.
Repairs and maintenance shall be carried out by a competent person and be in accordance with the producer's instructions.
NOTE: a competent person is someone who has the skills to carry out repairs or maintenance, e.g. by a training by the manufacturer.
5.2.
For repairs and replacement of parts, e.g. feet, if necessary contact the producer or distributor.
5.3.
Ladders should be stored in accordance with the producer's instructions.
5.4.
Ladders made of or using thermoplastic, thermosetting plastic and reinforced plastic materials should be stored out of direct sunlight.
5.5.
Ladders made of wood should be stored in a dry place and shall not be coated with opaque and vapour-tight paints.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved
containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Offset Ladder Height Min/Max: ................. 1400/2000mm
Step Ladder Height Min/Max: ................... 1320/2200mm
Treads: ........................................................................ 16
Width: .................................................................. 600mm
FIG.2
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
AFPL3
Issue 2 (H,3,F)
REGISTER YOUR
PURCHASE HERE
02/10/23

Advertisement

loading