Table of Contents
Advertisement
Before Requesting Service
Other Functions
Before Requesting Service
Before requesting service, check the following points once again.
Message of On Screen Display
Message of On Screen Display is displayed.
clock is not set.
PLEASE USE A CASSETTE
ST tag
REC is pressed without tab of
Cassette.
NO TIMER RECORDING
HAS BEEN SET
TIMER REC is pressed with
no timer programmes.
TIME A PROGRAMMES ARE
FULL
G-CODE is pressed when
8 programmes have been
already set.
MESSAGE
CAUSE
REMEDY
PLEASE BUM
Bites
REC is pressed without
Put in a video cassette.
cassette.
PLEASE STOP THE TAPE,
TUNER PRESET is selected
Stop the tape.
* during playback.
BLEASE SET THE CLOCK
PROG |s pressed when the
Set the clock.
te—_——___
>
Ke
See
Use a cassette with tab.
Set timer recording.
Cancel unneccessary programme.
VTR ISIN THE TIMER
STANOBY MODE
POWER is pressed during
timer standby mode.
Press TIMER REC to release from timer standby mode.
DEW FORMED IN THE VTA.
Dew forms.
Wait until the message disappears.
Self Test Indication
This VTR has a self-diagnosis and display function. If the VTR detects trouble during installation or during use, the following
indications automatically appear in the VTR display. Indications are displayed in the form of a single English letter plus two
numbers such as [H01].
INDICATION
CAUSE
REMEDY
U10
Dew forms.
Wait until the indication disappears.
HOO
Some trouble has occurred.
Consult your dealer for further advice.
(Numbers following H and F
Fog
differ according to the status
of the VTR.}
Wl
Helo
Hint
(29)
Advertisement
Table of Contents
