Table of Contents
Advertisement
Quick Links
ZAT-6000
NextGen TV Box
Installation and Description Guide
Version 2.1.6
Copyright © 2023 Zinwell Corporation. All rights reserved.
Zinwell and the logo of Zinwell are the distinctive trademarks of Zinwell Corporation in R.O.C. (Republic of China) and/or other jurisdictions.
This product is under the protection of Taiwan, R.O.C. (Republic of China) and international copyright and intellectual property laws.
October 2023, Version 2.1.6
NextGen TV Box Model: ASTC 3.0 ZAT-6000
Advertisement
Table of Contents
Related Manuals for Zinwell ZAT-6000
Summary of Contents for Zinwell ZAT-6000
- Page 1 Copyright © 2023 Zinwell Corporation. All rights reserved. Zinwell and the logo of Zinwell are the distinctive trademarks of Zinwell Corporation in R.O.C. (Republic of China) and/or other jurisdictions. This product is under the protection of Taiwan, R.O.C. (Republic of China) and international copyright and intellectual property laws.
- Page 2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 3: Table Of Contents
Contents Important Safety Instruction and Precaution _________________________________________3 Knowing Your NextGen TV Box _______________________________________________________4 Theory of Operation ______________________________________________________________4 Model Specification ______________________________________________________________4 Features __________________________________________________________________________5 Package Contents ________________________________________________________________5 Panel Specification _______________________________________________________________5 Finding Out the IR Remote Control ____________________________________________________6 Installing Your NextGen TV Box _______________________________________________________7 Installing Instruction in 3 Steps ___________________________________________________7 Setting up the Program System –... -
Page 4: Important Safety Instruction And Precaution
Important Safety Instruction and Precaution Read through all the instructions carefully before use. Operate this product only in the manner described. Only a Water-dampened soft-cloth is recommended to clean the surface of this product. Do not expose this product excess vibration. ... -
Page 5: Knowing Your Nextgen Tv Box
Knowing Your NextGen TV Box Theory of Operation Antenna Smart Phone / handhelds HDMI Coax Cable Model Specification ATSC1.0/3.0 Dual Mode Tuner 2 Tuner Tuner Input Frequency Range 42MHz ~ 866MHz 4K UHD Video/Audio (optional) Output HDMI 2.1 Ethernet 10/100M RJ-45 Wi-Fi 2.4/5Ghz 1T1R... -
Page 6: Features
Features » Emergency alerting system » ATSC 3.0 broadcast application compliant » ATSC 3.0 / 1.0 receiving capability » 4k UHD Video » Remote learning Application Package Contents items Q'ty Power Adapter Remote Control Quick Start Guide NextGen TV Box X 1 Panel Specification 1. -
Page 7: Finding Out The Ir Remote Control
Finding Out the IR Remote Control IR Key Function POWER Power Key AUDIO Audio Track Key CLOSE Close Caption CAPTION ALERT Alert Key E-LEARNING E-Learning Number keys 1 Number keys 2 Number keys 3 Number keys 4 Number keys 5 Number keys 6 Number keys 7 Number keys 8... -
Page 8: Installing Your Nextgen Tv Box
Installing Your NextGne TV Box Installing Instruction in 3 Steps Before Reading the Instructions: Refer to the page 5 Panel Specification for the location of each port or button mentioned below STEP 1. Connect your Coaxial Cable to the Antenna Port. STEP 2. -
Page 9: Setting Up The Program System - First Time Installation
Setting up the Program System – First Time Installation STEP 1. Turn on the Power of NextGne TV Box. Quick Setup page will be shown as the image on the left side. Press "OK" to confirm. STEP 2. Process of Channel Scanning will be completed once the percentage bar has reached 100%. -
Page 10: Wi-Fi On: Connecting To Internet Via Your Wi-Fi/Ap Router
Wi-Fi ON: Connecting to Internet via Your Wi-Fi/AP Router Before Reading the Instructions: The Wi-Fi and Ethernet functions CANNOT be executed at the same time. Ensure the NextGen TV Box is NOT CONNECTED to any Ethernet Cable before ENABLING Wi-Fi function in the NextGen TV Box. STEP 1. - Page 11 STEP 3. (IF Any) Use Cursor Keys (▲▼◄ ►) on the remote control to enter the "PASSWORD" of your Wi-Fi/AP router (RD2_Lyra_Voice_2.4G here is as an example) -> Use Cursor Keys (▲▼◄ ►) on the remote control and move to Done for confirmation (Refer to the image above) STEP 4.
-
Page 12: Wi-Fi Off: Connecting To Internet Via Ethernet Network
Wi-Fi OFF: Connecting to Internet via Ethernet Network Before Reading the Instructions: The Wi-Fi and Ethernet functions CANNOT be executed at the same time. Ensure the NextGen TV Box is NOT CONNECTED to any Wi-Fi before connecting to the Ethernet Cable. Refer to to the page 5 Panel Specification for the location of each port or ... -
Page 13: Wi-Fi Off: Knowing Hot Spot Function
Wi-Fi OFF: Knowing Hot Spot Function Sharing Internet Access to your PED (Personal Electronic Devices) Hot Spot will ONLY be functioning when Network Access is connected via Ethernet and Wi-Fi Mode is OFF After connecting to Internet via Ethernet, your NextGen TV Box now is in AP ... -
Page 14: Ensure Wi-Fi Mode Is Off Before Entering The Hot Spot Section
Ensure Wi-Fi Mode is OFF before entering the Hot Spot Section. Use Cursor Keys (▲▼◄ ►) on the remote control to MOVE to HotSpot (Refer to the picture on the Right side) ➞ Press "OK" on the remote control to confirm. Default Hot Spot Name: AndroidAP_xxxx ... -
Page 15: Function Overview
Function Overview Auto Scan Scan Channels Manual Scan Audio Language Closed Caption Setting Parental Rating Time Setting UI Settings Home Change PIN Guide Electronic Program Guide NextGen TV Box | Installation and Description Guide | 14... -
Page 16: Guide To The Setting System
Guide to the Setting System Press "MENU" (App Setting Key) to enter the Setting System. Refer to the image on the left side. Other Functions Searching for the Available Channels (Auto Scan) MENU (App Setting Key) ➞ Scan Channels ➞ Mode: Auto Scan ➞... -
Page 17: Selecting Your Preferred Language For Audio
Selecting Your Preferred Language for Audio MENU (App Setting Key) ➞ Audio Language ➞ Select your prefer language ➞ Press "BACK" to confirm. Turning Off the Caption MENU (App Setting Key) ➞ Closed Captions ➞ Press "OK" to confirm. Selecting the Parental Rating MENU (App Setting Key) ➞... -
Page 18: Time Settings
Time Settings MENU (App Setting Key) ➞ Time Setting ➞ Select time zone ➞ Press "BACK" to confirm. Setting the Display Duration MENU (App Setting Key) ➞ Closed Captions ➞ Select the display duration ➞ Press "OK" to confirm. Changing the Administrator PIN (Before entering the Change PIN screen, the Admin PIN MUST be ENTERED (the default password is:... -
Page 19: Obtaining The Program Content Introduction
Obtaining the Program Content Introduction Press "Guide" on the remote control ➞ Electronic Program Guide ➞ Use Cursor Keys (▲▼◄ ►) to select the different program blocks for getting the program content introduction. NextGen TV Box | Installation and Description Guide | 18... -
Page 20: Apk Installation And Software Upgrading Via Usb Storage Device
APK Installation and Software Upgrading via USB Storage Device STEP 1. Put the APK in an USB storage device. Insert the USB storage device into the USB port of the NextGen TV Box. Press "SETTING" button on the remote ... - Page 21 STEP 3. Select "the USB storage device" (such as Kingston USB drive) ➞ press "OK" to confirm. App Installer will list all APKs from the USB storage device. STEP 4. The installation screen is as below. Find the "INSTALL" button at the bottom right corner of the screen ➞...
-
Page 22: Software Upgrading Via Ota Service
Software Upgrading via OTA Service Before Reading the Instructions: Ensure your NextGen TV Box is CONNECTED to internet successfully. Checking on Internet Connection Status P.9-P.13 for more details. STEP 1. Press SETTING button (Android Setting Key) on the remote control ➞ Select "... - Page 23 STEP 3. Select "NextGenLiveTvLauncher 2.1.5" ➞ press "OK" to confirm. STEP 4. The installation screen is as above. Find the "INSTALL" button at the bottom right corner of the screen ➞ Press "OK" to install. STEP 5. Select "DONE" to complete the APK installation process. NextGen TV Box | Installation and Description Guide | 22...
-
Page 24: Trouble Shooting
Trouble Shooting Device Failure Possible Cause Solution Power is not Connect the power and ensure the No Picture connected device has been turned on. Nil or incorrect video Ensure cables are connected No Picture but Sound OK cable connections correctly. Connect the antenna cable and "No Signal"... -
Page 25: Contacting Us
Contacting Us Please kindly reach out us via the Contact Us function in our website: https://www.zinwell.com.tw/us/ NextGen TV Box | Installation and Description Guide | 24...
Need help?
Do you have a question about the ZAT-6000 and is the answer not in the manual?
Questions and answers